TECHNICAL DATA SHEET | ||||
Item | Unit | Typical Value | Test Standard | |
Tension Strengrth |
MD | Mpa (≥170) | 210 |
ASTM-D882 |
TD | Mpa (≥170) | 210 | ||
Elongation Break |
MD | % (≥90) | 110 |
ASTM-D882 |
TD | % (≥90) | 110 | ||
Friction coefficient |
Static | (≤0.65) | 0.5~0.65 |
ASTM-D1894 |
Dynamic | (≤0.55) | 0.45~0.55 | ||
Uniformity of Aluminum | % (±15) | -7.25~+8.35 | GB/T15717-1995 | |
Adhesion of Aluminum | N/15mm (≥1.5) | 2.0 | EAA TEST | |
Aluminum Thickness | OD | 2.2 | GB/T15717-1995 | |
Dyne (Metallized side) | mN/m (≥54) | 54 | ASTM-D2578 | |
Moisture-vapor Transmission Rate | g/(m2·24h) (≤3.5) | 1.2 | ASTM-F1249 | |
Oxygen Transmission Rate |
cm³/( m²·24h·0.1MPa)
(≤15.0) |
1.2 | ASTM-F1927 |
Specification | |||
Width | Thickness | Inner Core Diameter | Length |
≤2700mm | 8~100mic | 76mm(3″),152mm(6″) | 6000m,12000m,18000m.24000m.36000m |
Metallized film/Metallized flexible packaging
Our company is called ShanDong Changyu New Materials Co,.Ltd , established in August 2010,and covers a floor area of 58066 square meters. Our head office calls Zhejiang Changyu New Materials Co.,Ltd which is located in Haining, Zhejiang. Our Changyu Company totally have 15 metallized production lines, most are from Germany Leybold.Besides, we also have 4 PVDC coating production lines . We supply VMPET,VMCPP,VMOPP,ALOX, and KOPA,KPET,KOPP. Our annual yield can achieve 75000MT of metallized films and 6000MT of PVDC coated films.
Changyu has enjoyed high reputation in domestic market because of its high quality and good services,also our products are popular in Europe, Malaysia, Philippines, Thailand , etc.
Company/Production Outlook:
TECHNICAL DATA SHEET | ||||
Item | Unit | Typical Value | Test Standard | |
Tension Strengrth |
MD | Mpa (≥170) | 210 |
ASTM-D882 |
TD | Mpa (≥170) | 210 | ||
Elongation Break |
MD | % (≥90) | 110 |
ASTM-D882 |
TD | % (≥90) | 110 | ||
Friction coefficient |
Static | (≤0.65) | 0.5~0.65 |
ASTM-D1894 |
Dynamic | (≤0.55) | 0.45~0.55 | ||
Uniformity of Aluminum | % (±15) | -7.25~+8.35 | GB/T15717-1995 | |
Adhesion of Aluminum | N/15mm (≥1.5) | 2.0 | EAA TEST | |
Aluminum Thickness | OD | 2.2 | GB/T15717-1995 | |
Dyne (Metallized side) | mN/m (≥54) | 54 | ASTM-D2578 | |
Moisture-vapor Transmission Rate | g/(m2·24h) (≤3.5) | 1.2 | ASTM-F1249 | |
Oxygen Transmission Rate |
cm³/( m²·24h·0.1MPa)
(≤15.0) |
1.2 | ASTM-F1927 |
Specification | |||
Width | Thickness | Inner Core Diameter | Length |
≤2700mm | 8~100mic | 76mm(3″),152mm(6″) | 6000m,12000m,18000m.24000m.36000m |
Visual product packaging