KEY FEATURES
1. LiFePo4 lithium Energy storage Powerwall battery
2.56KWH/5.12KWH/7.68KWH/10.24KWH
2.
6000 Cycle life
(80% DOD@25
ºC
), 10 times more than AGM battery
3.
Usable Energy Ratio upto 95%
, 25-50% more than AGM battery
4. Compact Size and light weight , over 50% less than AGM battery
5. Wide Operation temperature
-20-60
ºC
6. LED and LCD display For Cell / Pack / BMS / SET
7. Wide Compatibility, Cooperate With Most Inverters
8. Embedded BMS , Full protection and Balance
9. Max 18 Modular recommend
2-8 PCS Parallel
to extend , OPTION
10. Customizable base on customer requirement
TECHNICAL SPECIFICATIONS
| MODE | LFP48100-PW | LFP48200-PW | |
| Battery Pack Module | Rated Voltage | 51.2V | 51.2V |
| Rated Capacity Ah | 100Ah±3% | 200Ah±3% | |
| Rated Energy | 5.12KWH | 10.24KWH | |
| Cycle Life | 6000 times @ 80% DOC.25ºC | ||
| Design Life time | Over 10 years | ||
| DOD | > 95% | ||
| IP Grade | IP21, Indoor | ||
| Communication | RS485 / CAN communication interface to Inverter , RS4851/RS4852 For Parallel Communictaion . Option | ||
| Parallel Connection | Max 18PCS, recommend 2-8 PCS, Reserved Address portal ( DIP Switch/ ADDR ) . Option | ||
| DC Output Connector | M8 bolt | ||
| Display | LED | Standby/charge/discharge/fault/ Capacity | |
| LCD | Cell/Pack Vdc/ Amp/ Ah/Temp , BMS Status and also Parallel and System set | ||
| Protection Function | Over charge /Over Discharge/Over Temperature/ Over Current /internal Short Circuit protection and Balance Modular and Cell Charge and discharge ( Option ), by Embedded BMS | ||
| Battery Pack Charge/Discharge | Recommended Charge Current | 80A | 80A |
| ( Base on Kemapower 3KW/24VDC 5KW/48VDC Inverter. Customizable by customer) | Max. Continue Charge Current | 100A | 100A |
| Recommended Charge Voltage | 56.4V | 56.4V | |
| Recommended Discharge Current | 150A | 150A | |
| Max. Continue Discharge Current | 175Amp | 175Amp | |
| Recommended Over Discharge Voltage | 44.8V | 44.8V | |
| Battery Cell | Cell type | Prismatic,LiFepo4 | |
| Rated Capacity Ah | 100Ah | 100Ah / 200Ah | |
| Rated voltage V | 3.2V | 3.2V | |
| Pack Connection | 16S1P | 8S2P or 8S1P | |
| BMS Parameter (Customizable) | Charge method | CC/CV, 3.65V cut off,0.05C cut off | |
| Max Pulse Charge Current | 120% * Max. continue Charge Current | ||
| Over charge Protection voltage | 58.4V | 58.4V | |
| Over Charge Voltage Return | 55.2V | 55.2V | |
| Max Pulse Discharge Protection Current | 300% * Max. Continue Discharge Current | ||
| Over Discharge Protection Voltage | 32V | 32V | |
| Over Discharge Return Voltage | 40V | 40V | |
| Over current protection delay time | 20 ±5 ms | ||
| Short protection delay time | 200-600 us. | ||
| Reset For BMS | yes. Inclued the RST switch. Wakeup function | ||
| Battery Standard | IEC62619, CE, UN38.3, MSDS | ||
| Product Size ( Around mm) Customizable | 525*460*170 | 850*525*180 | |
| Product Weight ( Around Kg) | 52 | 104 | |
| Package Size (mm) | 645*550*500 | 985*645*500 | |
| Package weight (Kg) | 71 | 131 | |