FKJ-MPPT
o
ff grid
wind solar hybrid charge
controller
Technical parameters of MPPT off grid wind solar hybrid charge controller 5KW
| TYPE | FKJ-MPPT 5KW | |||||
| Wind turbine input | ||||||
| Wind turbine rated power | 2500W DC24V | 3500W DC36V | 5000W DC48V | |||
| Max. control power / current | 5000W / 100A | 7000W / 100A | 10KW / 100A | |||
| Support the wind turbine to input the rated AC line voltage | AC48V/96V/120V(L-L) | |||||
| Dc dump load voltage | DC170V | |||||
| Three-phase braking voltage | DC190V | |||||
| Braking current | DC100A | |||||
| *Generator Over speed | Optional | |||||
| *Wind Over speed | Optional | |||||
| Manual control function | Manual brake ,* Remote control brake (with communication) | |||||
| Auto control function | Dump load. * Yaw, * Pitch, * Mechanical brake, * Hydraulic brake, * Electromagnetic brake | |||||
| *PV.Input | ||||||
| Rated Power (Customizable) | <2000Wp (Rated power of the wind turbine +Solar panel power ≤3800W) | |||||
| PV Voc | <200V | |||||
| Battery parameters | ||||||
| Rated voltage DC | 24V/36V/48V Automatic recognition | |||||
| Support battery type | Battery, lithium battery | |||||
| Over voltage disconnect voltage | Default | 32V | 48V | 64V | ||
| Set range | 18V-34V | 27V-51V | 36V-68V | |||
| Charging limit voltage | Default | 30V | 45V | 60V | ||
| Set range | 18V-34V | 27V-51V | 36V-68V | |||
| Over voltage reconnect voltage | Default | 30V | 45V | 60V | ||
| Set range | 18V-34V | 27V-51V | 36V-68V | |||
|
Equalize charging voltage
|
Default | 29.2V | 43.8V | 58.4V | ||
| Set range | 18V-34V | 27V-51V | 36V-68V | |||
| Boost charging voltage | Default | 28.8V | 43.2V | 57.6V | ||
| Set range | 18V-34V | 27V-51V | 36V-68V | |||
| Float charging voltage | Default | 27.6V | 41.4V | 55.2V | ||
| Set range | 18V-34V | 27V-51V | 36V-68V | |||
| Boost reconnect charging voltage | Default | 26.4V | 39.6V | 52.8V | ||
| Set range | 18V-34V | 27V-51V | 36V-68V | |||
| Equalize Duration | Default | 120 minutes | ||||
| Set range | 0-180 minutes | |||||
| Boost Duration | Default | 120 minutes | ||||
| Set range | 10-180minutes | |||||
| Electrical parameters | ||||||
| Rated charging current | 100A | |||||
| Battery fast-acting fuse | 150A/58V | |||||
| Rated charging power | 2500W/24V, 3750W/36V, 5000W/48V | |||||
| MPPT voltage range | (Battery voltage +2V)~144V (Under the condition of 25ºC) | |||||
| MPPT tracking efficiency | ≥99.5% | |||||
| Max. Conversion efficiency | 98.5% | |||||
| Full load efficiency | 97.6% | |||||
| Temperature compensate coefficient | -3mV/ºC/2V( Default) | |||||
| Self-consumption | 60mA/24V;50mA/36V;46mA/48V | |||||
| Grounding | Common negative grounding | |||||
| General parameters | ||||||
| Function | Rectification, Charging, Voltage control, Charging current control, Dump load control, Parameter setting, *DC output | |||||
| Auto protection | Over voltage protection, Over-current protection, Reverse connection protection, Constant voltage charging, Constant current charging, Arrester | |||||
|
Display |
LCD+LED | |||||
| Monitor | The power, voltage, current of Wind turbine and Solar panels, Battery voltage, Charging current, * Cumulative power generation, * Power generation at any time, * Revolution, * wind speed | |||||
| Protection level | IP20(Indoor)IP65 (Outdoors) | |||||
| Telematics (optional) | RS485/USB/GPRS/WIFI/Ethernet | |||||
| Environment | Working temperature -30-60°C, Humidity<90%(No condensation) | |||||
| Noise (1m) | <40dB | |||||
| Refrigeration | Air cooling | |||||
| S ize / weight | ||||||
| Controller size / weight | 400*230*550mm 31Kg | |||||
| Dump load size / weight | 245*290*120mm 4.5Kg | |||||
*The above technical parameters are for reference only, and can be customized according to the user's technical parameters
Technical parameters of MPPT off
grid wind
solar hybrid
charge
controller
3KW
| TYPE | FKJ-MPPT 3KW | |||||
| Wind turbine input | ||||||
| Wind turbine rated power | 2000W DC24V | 2500W DC36V | 3000W DC48V | |||
| Max. control power / current | 4000W / 80A | 5000W / 80A | 6000W / 80A | |||
| Support the wind turbine to input the rated AC line voltage | AC48V/96V/120V(L-L) | |||||
| Dc dump load voltage | DC170V | |||||
| Three-phase braking voltage | DC190V | |||||
| Braking current | DC80A | |||||
| *Generator Over speed | Optional | |||||
| *Wind Over speed | Optional | |||||
| Manual control function | Manual brake ,* Remote control brake (with communication) | |||||
| Auto control function | Dump load. * Yaw, * Pitch, * Mechanical brake, * Hydraulic brake, * Electromagnetic brake | |||||
| *PV.Input | ||||||
| Rated Power (Customizable) | <2000Wp (Rated power of the wind turbine+Solar panel power≤3800W) | |||||
| PV Voc | <200V | |||||
| Battery parameters | ||||||
| Rated voltage DC | 24V/36V/48V Automatic recognition | |||||
| Support battery type | Battery, lithium battery | |||||
| Over voltage disconnect voltage | Default | 32V | 48V | 64V | ||
| Set range | 18V-34V | 27V-51V | 36V-68V | |||
| Charging limit voltage | Default | 30V | 45V | 60V | ||
| Set range | 18V-34V | 27V-51V | 36V-68V | |||
| Over voltage reconnect voltage | Default | 30V | 45V | 60V | ||
| Set range | 18V-34V | 27V-51V | 36V-68V | |||
|
Equalize charging voltage
|
Default | 29.2V | 43.8V | 58.4V | ||
| Set range | 18V-34V | 27V-51V | 36V-68V | |||
| Boost charging voltage | Default | 28.8V | 43.2V | 57.6V | ||
| Set range | 18V-34V | 27V-51V | 36V-68V | |||
| Float charging voltage | Default | 27.6V | 41.4V | 55.2V | ||
| Set range | 18V-34V | 27V-51V | 36V-68V | |||
| Boost reconnect charging voltage | Default | 26.4V | 39.6V | 52.8V | ||
| Set range | 18V-34V | 27V-51V | 36V-68V | |||
| Equalize Duration | Default | 120 minutes | ||||
| Set range | 0-180 minutes | |||||
|
Boost Duration |
Default | 120 minutes | ||||
| Set range | 10-180 minutes | |||||
| Electrical parameters | ||||||
| Rated charging current | 80A | |||||
| Battery fast-acting fuse | 125A/58V | |||||
| Rated charging power | 2000W/24V, 3000W/36V, 4000W/48V | |||||
| MPPT voltage range | (Battery voltage +2V)~144V (Under the condition of 25ºC) | |||||
| MPPT tracking efficiency | ≥99.5% | |||||
| Max. Conversion efficiency | 98.5% | |||||
| Full load efficiency | 97.6% | |||||
| Temperature compensate coefficient | -3mV/ºC/2V(Default) | |||||
| Self-consumption | 98mA/12V;60mA/24V;50mA/36V;46mA/48V | |||||
| Grounding | Common negative grounding | |||||
| General parameters | ||||||
|
Function |
Rectification, Charging, Voltage control, Charging current control, Dump load control, Parameter setting, *DC output | |||||
| Auto protection | Over voltage protection, Over-current protection, Reverse connection protection, Constant voltage charging, Constant current charging, Arrester | |||||
| Display | LCD+LED | |||||
| Monitor | The power, voltage, current of Wind turbine and Solar panels, Battery voltage, Charging current, * Cumulative power generation, * Power generation at any time, * Revolution, * wind speed | |||||
| Protection level | IP20(Indoor)IP65 (Outdoors) | |||||
| Telematics (optional) | RS485/USB/GPRS/WIFI/Ethernet | |||||
| Environment | Working temperature -30-60°C, Humidity<90%(No condensation) | |||||
| Noise (1m) | <40dB | |||||
| Refrigeration | Air cooling | |||||
| S ize / weight | ||||||
| Controller size / weight | 400*230*550mm 29.1Kg | |||||
| Dump load size / weight | 245*290*120mm 4.5Kg | |||||
*
The above technical parameters are for reference only, and can be customized according to the user's technical parameters
Technical parameters of MPPT off
grid wind
solar hybrid
charge
controller
2KW
| TYPE | FKJ-MPPT 2KW | |||||
| Wind turbine input | ||||||
| Wind turbine rated power | 1000W DC24V | 1500W DC36V | 2000W DC48V | |||
| Max. control power / current | 2000W / 50A | 3000W / 50A | 4000W / 50A | |||
| Support the wind turbine to input the rated AC line voltage | AC48V/96V/120V(L-L) | |||||
| Dc dump load voltage | DC170V | |||||
| Three-phase braking voltage | DC190V | |||||
| Braking current | DC50A | |||||
| *Generator Over speed | Optional | |||||
| *Wind Over speed | Optional | |||||
| Manual control function | Manual brake ,* Remote control brake (with communication) | |||||
| Auto control function | Dump load. * Yaw, * Pitch, * Mechanical brake, * Hydraulic brake, * Electromagnetic brake | |||||
| *PV.Input | ||||||
| Rated Power (Customizable) | <2000Wp (Rated power of the wind turbine +Solar panel power ≤2KW) | |||||
| Solar panels Voc | <200V | |||||
| Battery parameters | ||||||
| Rated voltage DC | 24V/36V/48V Automatic recognition | |||||
| Support battery type | Battery, lithium battery | |||||
| Over voltage disconnect voltage | Default | 32V | 48V | 64V | ||
| Set range | 18V-34V | 27V-51V | 36V-68V | |||
| Charging limit voltage | Default | 30V | 45V | 60V | ||
| Set range | 18V-34V | 27V-51V | 36V-68V | |||
| Over voltage reconnect voltage | Default | 30V | 45V | 60V | ||
| Set range | 18V-34V | 27V-51V | 36V-68V | |||
|
Equalize charging voltage
|
Default | 29.2V | 43.8V | 58.4V | ||
| Set range | 18V-34V | 27V-51V | 36V-68V | |||
| Boost charging voltage | Default | 28.8V | 43.2V | 57.6V | ||
| Set range | 18V-34V | 27V-51V | 36V-68V | |||
| Float charging voltage | Default | 27.6V | 41.4V | 55.2V | ||
| Set range | 18V-34V | 27V-51V | 36V-68V | |||
| Boost reconnect charging voltage | Default | 26.4V | 39.6V | 52.8V | ||
| Set range | 18V-34V | 27V-51V | 36V-68V | |||
| Equalize Duration | Default | 120 minutes | ||||
| Set range | 0-180 minutes | |||||
| Boost Duration | Default | 120 minutes | ||||
| Set range | 10-180 minutes | |||||
| Electrical parameters | ||||||
| Rated charging current | 50A | |||||
| Battery fast-acting fuse | 80A 58V | |||||
| Rated charging power | 1200W/24V, 1800W/36V, 2400W/48V | |||||
| MPPT voltage range | (Battery voltage +2V)~144V (Under the condition of 25ºC) | |||||
| MPPT tracking efficiency | ≥99.5% | |||||
| Max. Conversion efficiency | 98.5% | |||||
| Full load efficiency | 97.6% | |||||
| Temperature compensate coefficient | -3mV/ºC/2V( Default) | |||||
| Self-consumption | 60mA/24V;50mA/36V;46mA/48V | |||||
| Grounding | Common negative grounding | |||||
| General parameters | ||||||
| Function | Rectification, Charging, Voltage control, Charging current control, Dump load control, Parameter setting, *DC output | |||||
| Auto protection | Over voltage protection, Over-current protection, Reverse connection protection, Constant voltage charging, Constant current charging, Arrester | |||||
| Display | LCD+LED | |||||
| Monitor | The power, voltage, current of Wind turbine and Solar panels, Battery voltage, Charging current, * Cumulative power generation, * Power generation at any time, * Revolution, * wind speed | |||||
| Protection level | IP20(Indoor)IP65 (Outdoors) | |||||
| Telematics (optional) | RS485/USB/GPRS/WIFI/Ethernet | |||||
| Environment | Working temperature -30-60°C, Humidity<90%(No condensation) | |||||
|
(1m)
Noise (1m) |
<40dB | |||||
| Refrigeration | Air cooling | |||||
| Size / weight | ||||||
| Controller size / weight | 400*230*550mm 26.5Kg | |||||
| Dump load size / weight | 245*290*120mm 4.5Kg | |||||
*The above technical parameters are for reference only, and can be customized according to the user's technical parameters