Rigid PU Manually Operating Process Formulated System Polyether Polyol for Door Panel

Model NO.
ZLC1007
Packing
Blend Polyol in 220kg Drums
Extinguishing Time
50 Sec
Flame Spread
40-45mm
Specific Gravity@20ºC
1.18GM/Cc
Mix Ratio
1:1
Viscosity@20ºC
300±50cps
Transport Package
Steel Drum/IBC Drum/Tank
Specification
pure
Trademark
G-TECH@
Origin
China
HS Code
390931
Production Capacity
30000mt/Year
Package Size
60.00cm * 60.00cm * 102.00cm
Package Gross Weight
218.000kg
Reference Price
$ 2.70 - 16.20
Contact Us

Product Description

POLYOL BLEND ZLC-1007

ZLC1007 is a blend of polyols,surfactants,catalysts,fire retardant and CFC free blowing agent.The polyol offers increased resistance to burning and spread of flames.The polyol blend is specifically developed as one part of a two components system for rigid polyurethane insulated pannel processed by filling with dispensing machine or by mutual pouring in place.
It is widely used in manufacture of composite board,sandwich panel,inorganic panel applied for door,outwall,roofing,air condition duct and so on.
Panels manufactured with ZLC1007 system will display higher degree of compression and tensile strength in addition to its thermal and Eco-Efficiency performance.The higher percentage of closed cell is considered excellent barrier for air,water and noise.

PHYSICAL and CHEMICAL PROPERTIES    
  POLYOL COMPONENT MDI-ISOCYANATE COMPONENT
Apperance Clear amber liquid Dark brown viscous liquid
Viscosity@20 ºC 300±50cps 200±40cps
Specific gravity@20 ºC 1.18gm/cc 1.23gm/cc
MIX RATIO
(lab trials suggest following formulation) 		100pbw 100pbw

TYPICAL REACTION TIME AND DENSIT Y
C up test/Lab trials with 4000rpm Mixer
  Components at 20 ºC PACKING
Cream Time,sec /  
Gel Time,sec / Blend Polyol in 2 2 0kg drums
Track Free Time,sec /
Rise Time,sec / ISO/MDI in 250kg drums
Free Rise Density,kg/m3 22-24

BURNING CHARACTERISTIC S           
Self extinguishing to (ASTM 1692-MD/74) Classification-B2
Flame Spread 40-45mm Extinguishing Time 50 sec

HANDLING and STORAG E               
ZLC-1007 Polyol and PU systems should be stored at room temperature below 25 ºC  in sealed drums.Agitate contents before use particularly after long standing.Precautions should be observed to avoid prolonged or repeated skin contact with the products or its introduction in or near to the eyes.If skin contact occurs all contaminated clothing should be removed and the effected skin area wiped with a cloth or paper towels saturated with ethanol or equivalent solvent followed by washing with soap and water.Goggle or eye shields should be worn when there is a danger of splashing or eye contact.With the exercise of such care ZLC-1007 System should not present any undue hazard to health under normal working conditions(Protective clothing and eye protection is recommended when handling Polyol).

Rigid PU Manually Operating Process Formulated System Polyether Polyol for Door Panel Rigid PU Manually Operating Process Formulated System Polyether Polyol for Door Panel Rigid PU Manually Operating Process Formulated System Polyether Polyol for Door Panel Rigid PU Manually Operating Process Formulated System Polyether Polyol for Door Panel Rigid PU Manually Operating Process Formulated System Polyether Polyol for Door Panel Rigid PU Manually Operating Process Formulated System Polyether Polyol for Door Panel

 

Polymer & Resin

PNEUTEC.IT, 2023