500W 20A 600W 25A 800W 33A 1000W 40A 1200W 50A 1500W 62.5A 3000W 125A 4000W 166A 200A SMPS Power Supply 24V AC DC Switching Power Supply for LED

Model NO.
S-500W-4000W
Voltage Regulating Mode
Width Modulation Type
Power Supplying System
Terminal Power Distribution Equipment
Energy Transmission
Two-way Transmission
Modulation System
PFAW
Certification
CE
Brand
Chstsi
Specification
215*115*50mm
Trademark
CHSTSI
Origin
Zhejiang Wenzhou Leqing Liushi
Production Capacity
3000000/Years
Reference Price
Please contact us for quote
Contact Us

Product Description

500W 20A 600W 25A 800W 33A 1000W 40A 1200W 50A 1500W 62.5A 3000W 125A 4000W 166A 200A SMPS Power Supply 24V AC DC Switching Power Supply for LED


 

Project
Technical specifications

Output
Rated power 		500W-600W

DC voltage 		0-12V 0-24V 0-48V 0-72V 0-110V

Ripple and noise 		<200mv <200mv <290mv <290mv <290mv

Voltage accuracy 		±1%

Load adjustment ratio 		0.3% 0.3% 0.3% 0.3% 0.3%

Linear adjustment rate 		0.50%
 
Voltage range 		108-264VAC 47Hz-63Hz;245VDC-370VDC

Efficiency (Typical) 		>80% >80% >80% >80% >80%

Operating current 		220VAC;18A

Pulse current 		60A 230VAC

Start-up, Rise and hold times 		2000ms,50ms,20ms;230VAC

Protection
Overload protection
105%-135% Type, Constant current output + Cut off output and reset when V0 drops below undervoltage point, Power on again

Over-temperature protection
RTH3, The fan runs continuously, And output is shut off when the temperature ≥90°C.

Environment
Operating temperature, Humidity 		10ºC~+50Degree centigrade:20%~90RH

Storage temperature, Humidity 		20ºC~+85Degree centigrade:10%~90RH

Safety standards
Withstand voltage
Input-Output: 15KVAC
Input-Enclosure: 15KVAC
Output-Enclosure: 0.5KVAC
Duration: 1 minute

Leakage current
1.5VAC<6mA
Input-output
1.5VAC <6mA

Leakage current
220VAC<1.5mA
Input-output
220VAC<1.5mA

Isolation resistance 		500VDC/100MQ

Others
Product Dimension 		215*115*50MM

Product Weight 		0.9KGS
Package Size 46.8*33*26.5CM ( 20 pcs/Carton)

Net weight 		18KGS
Gross Weight  19KGS
500W 20A 600W 25A 800W 33A 1000W 40A 1200W 50A 1500W 62.5A 3000W 125A 4000W 166A 200A SMPS Power Supply 24V AC DC Switching Power Supply for LED

Project
Technical specifications

Output
Rated power 		Small size 800w/1000w switching power supply

DC voltage 		0-12V 0-24V 0-48V 0-72V 0-90V

Ripple and noise 		<200mv <200mv <290mv <290mv <290mv

Voltage accuracy 		±1%

Load adjustment ratio 		0.3% 0.3% 0.3% 0.3% 0.3%

Linear adjustment rate 		0.50%
 
Voltage range 		108-264VAC 47Hz-63Hz;245VDC-370VDC

Efficiency (Typical) 		>80% >80% >80% >80% >80%

Operating current 		220VAC;18A

Pulse current 		60A 230VAC

Start-up, Rise and hold times 		2000ms,50ms,20ms;230VAC

Protection
Overload protection
105%-135% Type, Constant current output + Cut off output and reset when V0 drops below undervoltage point, Power on again

Over-temperature protection
RTH3, The fan runs continuously, And output is shut off when the temperature ≥90°C.

Environment
Operating temperature, Humidity 		10ºC~+50Degree centigrade:20%~90RH

Storage temperature, Humidity 		20ºC~+85Degree centigrade:10%~90RH

Safety standards
Withstand voltage
Input-Output: 15KVAC
Input-Enclosure: 15KVAC
Output-Enclosure: 0.5KVAC
Duration: 1 minute

Leakage current
1.5VAC<6mA
Input-output
1.5VAC <6mA

Leakage current
220VAC<1.5mA
Input-output
220VAC<1.5mA

Isolation resistance 		500VDC/100MQ

Others
Product Dimension 		238*65*124MM

Product Weight 		1.2KGS
Package Size 41*28*29CM ( 10 pcs/Carton)

Net weight 		12KGS
Gross Weight  13KGS
500W 20A 600W 25A 800W 33A 1000W 40A 1200W 50A 1500W 62.5A 3000W 125A 4000W 166A 200A SMPS Power Supply 24V AC DC Switching Power Supply for LED
500W 20A 600W 25A 800W 33A 1000W 40A 1200W 50A 1500W 62.5A 3000W 125A 4000W 166A 200A SMPS Power Supply 24V AC DC Switching Power Supply for LED

Project
Technical specifications

Output
Rated power 		1000W-1200W-1500W-2000W

DC voltage 		0-12V 0-24V 0-48V 0-72V 0-90V

Ripple and noise 		<200mv <200mv <290mv <290mv <290mv

Voltage accuracy 		±1%

Load adjustment ratio 		0.3% 0.3% 0.3% 0.3% 0.3%

Linear adjustment rate 		0.50%
 
Voltage range 		108-264VAC 47Hz-63Hz;245VDC-370VDC

Efficiency (Typical) 		>80% >80% >80% >80% >80%

Operating current 		220VAC;18A

Pulse current 		60A 230VAC

Start-up, Rise and hold times 		2000ms,50ms,20ms;230VAC

Protection
Overload protection
105%-135% Type, Constant current output + Cut off output and reset when V0 drops below undervoltage point, Power on again

Over-temperature protection
RTH3, The fan runs continuously, And output is shut off when the temperature ≥90°C.

Environment
Operating temperature, Humidity 		10ºC~+50Degree centigrade:20%~90RH

Storage temperature, Humidity 		20ºC~+85Degree centigrade:10%~90RH

Safety standards
Withstand voltage
Input-Output: 15KVAC
Input-Enclosure: 15KVAC
Output-Enclosure: 0.5KVAC
Duration: 1 minute

Leakage current
1.5VAC<6mA
Input-output
1.5VAC <6mA

Leakage current
220VAC<1.5mA
Input-output
220VAC<1.5mA

Isolation resistance 		500VDC/100MQ

Others
Product Dimension 		132*291*68MM

Product Weight 		2.6KGS
Package Size 41*28*29CM ( 6 pcs/Carton)

Net weight 		15.6KGS
Gross Weight  16.6KGS
500W 20A 600W 25A 800W 33A 1000W 40A 1200W 50A 1500W 62.5A 3000W 125A 4000W 166A 200A SMPS Power Supply 24V AC DC Switching Power Supply for LED
3000W Switching power supply with display
Voltage type 24V 36V 48V 60V 90V 220V 300V
Model 3000-24 3000-36 3000-48 3000-60 3000-90 3000-220 3000-300
DC output voltage 0-24V 0-36V 0-48V  0-60V 0-90V 0-220V 0-300V
Rated output current 125A 83.3A 62.5A 50A 33.3A 13.6A 10A
Rated output power 3000W 3000W 3000W 3000W 3000W 3000W 3000W
Ripple (max) 200mv 200mv 200mv 230mv 250mv 250mv 300mv
Efficiency 92.0% 92.00% 92.5% 93% 93.2% 93% 94%
Input voltage AC 180-260V
Power Factor (power factor) PF0.9/110VA1 (at 100% full load)
P-099/220VAC (at 100% full load)
Output overload protection The over-protection mode is constant current and constant power mode, which locks the output current value from increasing, while the output voltage decreases as the load increases.
High temperature protection When the heat sink temperature of PWM body tube reaches 85°C1 and soil 596, the output voltage is turned off and reduced to 75'C +5% automatic recovery
Output overvoltage protection The overvoltage point is 115% of the nominal voltage. After overvoltage protection is triggered, it will be locked and cannot be automatically restored. Power must be disconnected and then reconnected to restore normal operation.
Insulation properties Input to output: 1500VAC
 Input to case: 1500VAC
Operating temperature 10 degrees to 55 degrees, derating is required when operating at temperatures above the limit.
Heat dissipation methods Temperature-controlled automatic variable-speed fan (internal blowing mode)
Other Product dimension 285*185*70MM
Product weight 4.1KGS
Package size  46.5*32.5*26CM ( 3 pcs/Carton) 
Net weight 12.3KGS
Gross weight 13.3KGS
500W 20A 600W 25A 800W 33A 1000W 40A 1200W 50A 1500W 62.5A 3000W 125A 4000W 166A 200A SMPS Power Supply 24V AC DC Switching Power Supply for LED
4000w switching power supply
Voltage type 24V 36V 48V 60V 90V 110V 220V
Model 4000-24 4000-36 4000-48 4000-60 4000-90 4000-110 4000-220
DC output voltage 0-24V 0-36V 0-48V  0-60V 0-90V 0-110V 0-220V
Rated output current 166.6A 111.1A 83.3A 66.6A 44.4A 36.3A 18.1A
Rated output power 4000W 4000W 4000W 4000W 4000W 4000W 4000W
Ripple (max) 200mv 200mv 200mv 230mv 250mv 250mv 300mv
Efficiency 92.0% 92.00% 92.5% 93% 93.2% 93% 94%
Input voltage AC 180-260V
Power Factor (power factor) PF0.9/110VA1 (at 100% full load)
P-099/220VAC (at 100% full load)
Output overload protection The over-protection mode is constant current and constant power mode, which locks the output current value from increasing, while the output voltage decreases as the load increases.
High temperature protection When the heat sink temperature of PWM body tube reaches 85°C1 and soil 596, the output voltage is turned off and reduced to 75'C +5% automatic recovery
Output overvoltage protection The overvoltage point is 115% of the nominal voltage. After overvoltage protection is triggered, it will be locked and cannot be automatically restored. Power must be disconnected and then reconnected to restore normal operation.
Insulation properties Input to output: 1500VAC
 Input to case: 1500VAC
Operating temperature 10 degrees to 55 degrees, derating is required when operating at temperatures above the limit.
Heat dissipation methods Temperature-controlled automatic variable-speed fan (internal blowing mode)
Other Product dimension 315*208*73MM
Product weight 4.55KGS
Package size  46.5*32.5*26CM ( 3 pcs/Carton) 
Net weight 13.65KGS
Gross weight 14.6KGS


FAQ
1.Q:Are you a manufacturer?
A: Yes,we are a professional and origin switching power supply manufacturer.

2.Q: What warranty do you offer?
A: Each product with 1 year warranty,expect the human damage and force majeure factor .
Beyond the guarantee period machine ,we will provide maintenance service and technical support.

3.Q: What about minimum order quantity?
A: We have no limit for big quantity, but you'd better buy only one carton at least.

4.Q: Can you do OEM/ODM?
A: Yes, we are factory and we can customize as your requirements.

5.Q:What kind of inspection you can provide ?
A: Each switching power supply will ageing test 24 hours ,to guarantee all goods are in the perfect condition before shipment .we also accept the inspection by the third part you appointed.

 

 

Switching Power Supply

PNEUTEC.IT, 2023