Model | IPS-SP12-100 | IPS-SP24-50 | IPS-SP36-33.3 | IPS-SP48-25 | IPS-SP60-20 | IPS-SP200-6 | IPS-SP300-4 | |
Item | Technical indicators | |||||||
Output | DC voltage | 12 V DC | 24VDC | 36VDC | 48VDC | 60VDC | 200VDC | 300VDC |
Rated current | 0 ~100 A | 0 ~50 A | 0 ~33.3 A | 0 ~25 A | 0-20A | 0~6A | 0~4A | |
Rated power | 1200W | |||||||
Ripple and noise | <150mV | <150mV | <240mV | <240mV | <240mV | <240mV | <240mV | |
Voltage accuracy | ±1% | |||||||
Output voltage regulation range | 0 ~12VDC | 0 ~24 V DC | 0 ~36 V DC | 0~48 V DC | 0~60VDC | 0~200VDC | 0~4VDC | |
Load adjustment rate | 0.3% | |||||||
Linear adjustment rate | 0.5% | |||||||
Input | Voltage range | 180-264VAC 340-440VAC;254VDC~370VDC | ||||||
Efficiency (typical) | >85% | |||||||
Working current | 220VAC;21A | |||||||
Impulse current | 60A 230VAC | |||||||
Start, rise, hold time | 2000ms,50ms,20ms;230VAC | |||||||
Protect | Over-temperature protection | 105% ~ 135% type; Constant current output + V0 drop undervoltage point cut-off output reset; Power on again | ||||||
Over-temperature | RTH3; The fan operates normally, ≥ N90°C, and the output is closed | |||||||
E nvironment | Operating temperature, humidity | -10°C ~ +50°C;20%-90RH | ||||||
Storage temperature, humidity | - 20°C~+85°C;10%~95RH | |||||||
Safety regulations | Withstand voltage | Input - output: 1.5kVac input housing: 1.5kVac output housing: 05kvac for 1 minute | ||||||
Leakage current | Input-output 1.5KVAC Time< 6mA | |||||||
Leakage current | Input-output 220VAC Time< 1.5mA | |||||||
Isolation resistance | Input - output, input - housing, output - housing, 500VDC/100M Ω | |||||||
O ther | S ize | 291 * 132 * 68(MM) | ||||||
N W/GW | 2.7KG/3KG |