Boracic UHMWPE Sheet and Machined Parts

Model NO.
XX-015
Transport Package
40
Specification
any size
Trademark
Xinxing
Origin
China
HS Code
3920109090
Production Capacity
999999
Reference Price
$ 35.10 - 53.10
Contact Us

Product Description

Boracic UHMWPE sheet and machined parts

Product Description

5% Boron by weight to shield neutrons, are boron loaded PE(U)HMW grades. The high hydrogen content of PE (U)HMW makes it very suitable for slowing down fast neutrons to lower energy thermal (slow) neutrons, which are then absorbed by the added boron compound.
Whereas both PE-HMW and PE-UHMW are suitable for neutron shielding, PE-UHMW is often preferred because of its better deformation behaviour at high temperatures and its superior impact strength and wear resistance.
Boracic UHMWPE Sheet and Machined Parts

Borated PE Products:
 1.5% Boron ,    3% Boron,   5% Boron, 10% Boron , 15%Boron

Size:

All size could be supplied by customers' requirement
Boracic UHMWPE Sheet and Machined Parts

 Product performance
 
Boron carbide content 5% (by weight) or specification
Density acuity 1.028 g/cm3
Thermal deformation temperature (load rho = 0.46 M rho (a)   72 ºC
Linear expansion coefficient of  8.933 x 10-51 / ºC
Heat temperature  126 ºC (DTA measurements)
Thermal strength  material 24 mpa
The impact strength (gap)   19 kj/m2 material
h Boracic UHMWPE Sheet and Machined Parts ospital

Advantage: 

1,Have good irradiation resistance,

2,No activation products, secondary gamma ray energy is low;

3,Good chemical stability, corrosion resistance, non-toxic, no smell.

4,High mechanical strength, smooth surface, easy to facilitate decontamination, mechanical processing, the characteristics of easy installation and maintenance

Boracic UHMWPE Sheet and Machined Parts

How Can I Fabricate and Finish it?
Use standard woodworking tools: table saws, table routers, drills, blades and bits. Carbide router bits with two to four flutes are recommended.

How to Care and Store?
  • Store the sheets flat on a level surface
  • Keep away from teak oil and other products that can stain the finish
  • Use china markers or water-based markers to draw patterns
  • Pen marks can usually be removed with household cleaners
  • Keep away from heat sources that exceed 180°F
  • Because there is no grain, parts can be cut from any area of the sheet
  • Save the scraps for small parts, shims, spacers and plugs
Boracic UHMWPE Sheet and Machined Parts
What are common applications?
  • Airport Security and Sea Port Security
  • International Border Security
  • Doors for Linear Accelerators
  • Medical Vaults 
  • Nuclear-Powered Vessels
  • Research Applications

Can I use a CNC machine?
Yes.

Will the material produce dust when fabricating?
No, only small shavings.

 

 

Plastic Sheet, Board & Panel

PNEUTEC.IT, 2023