Specifications
NO.
|
Item
|
Specs
|
1
|
Dimension and weight
|
103.5mmx107mmx64mm;480g
|
2
|
External diameter of outlet
|
20mm
|
3
|
External diameter of inlet
|
20mm
|
4
|
Driving mechanism
|
Brushless, magnetic separation
|
5
|
Material of pump shell
|
ABS,PES/SPS/PPS/PA66+30%GF (Optional)
|
6
|
Condition of use
|
Can continuously work, submersible or land use (not self-priming)
|
7
|
Suitable medium
|
Water, oil, or normal acid/ alkaline liquids
(Pre-test needed for special liquid)
|
8
|
Max working temperature
|
60ºC(for T sub-series) or 100ºC(for S/A sub-series)
|
9
|
Power consumption
|
2.5W~45.6W(for T sub-series) or 2.5W~86.4W(for S/A sub-series)
|
10
|
Rated voltage
|
12Vdc or 24Vdc
|
11
|
Working voltage range
|
5Vdc ~ 12Vdc or 5Vdc ~ 24Vdc
|
12
|
Max load current
|
2.1A (for T sub-series) or 3.8A(for S/A sub-series)
|
13
|
Max horizontal flow rate
|
36L/MIN(for T sub-series) or 41L/MIN(for S/A sub-series)
|
14
|
Max static lift
|
4M(for T sub-series) or 6.5M(for S/A sub-series)
|
15
|
Noise class
|
IP68(suitable for submersible installation)
|
16
|
Waterproof class
|
Can be more than 30,000hrs
|
17
|
Life span
|
Can be suitable solar panel, batteries, source adapter or other power module
|
18
|
Power supply
|
Water protection, dry-run protection, stall protection, stuck protection
(functions are optional for customization)
|
19
|
Protection function
|
Speed adjustable by PWM signal, 0~5V analog signal or potentiometer (functions are optional for customization)
|
20
|
Power regulation function
|
IP68(suitable for submersible installation)
|
Features
-
Small size, high efficiency, maintenance-free, low consumption, strong anti-jamming ability, stable performance
-
Brushless with no pollution, adopts high-performance ceramics shaft and high-precision carbon fiber sleeve together (stainless steel shaft optional for reducing cost)long life span
-
Stator and control circuits are completely sealed by epoxy resin completely separated with rotor, waterproof, avoided water-leakage problem which long exists in normal DC motor pump products
-
Protection functions can be customized such as lock protection, dry-run protection and so on.
-
Wide range of working voltage; parameters can be adjustable, e.g. 12VDC pump can have lift of 1m and lift of 3m with the same pump body.
-
For A/S sub-series,soft-start without impact,can be directly powered by solar panel; circuit parts and motor parts completely separated, no electronic components inside pump body; pump body is made of high-temperature-resistant material, so pump can continuously work at fluid with high temperature (as high as 100C); have several protection functions, such as impeller&rotor lock protection, polarity reverse-connected protection, over-load protection, over-current protection, etc.
-
For A sub-series, it's easy to regulate the power/speed of pump via PWM signal/ 0~5V analog signal/ potentiometer; flow rate & lift can be smoothly adjusted
-
Reduced the mortality to 0.05% after long-time study by R&D dep.
-
Lift of pumps can be doubled when they are connected in series
-
Suitable for submersible installation or land use (should be located below fluid level)
-
Offer ODM serve for pump and other controller system
Difference between 2phase & 3phase brushless DC pump
Electrical parameters
(only for reference,parameters can be customized for specific requirements)
Model No.
|
Voltage
|
Max load current
|
Max static lift
|
Max flow rate
|
Power consumption
|
V(dc)
|
A
|
M
|
L/H
|
w
|
DC50D-1220T
|
12
|
1.57
|
2.00
|
1300
|
18.8
|
DC50D-1220S
|
DC50D-1220A
|
DC50D-1230S
|
12
|
3.0
|
3.00
|
1700
|
36.0
|
DC50D-1230A
|
DC50D-1240S
|
12
|
3.8
|
4.00
|
2150
|
45.6
|
DC50D-1240A
|
DC50D-2430T
|
24
|
1.5
|
3.00
|
1700
|
36.0
|
DC50D-2430S
|
DC50D-2430A
|
DC50D-2440T
|
24
|
1.9
|
4.00
|
2150
|
45.6
|
DC50D-2440S
|
DC50D-2440A
|
DC50D-2450S
|
24
|
2.9
|
5.00
|
2300
|
69.6
|
DC50D-2450A
|
DC50D-2465S
|
24
|
3.6
|
6.50
|
2450
|
86.4
|
DC50D-2465A
|
NOTE
|
-
Information including continuous working time, working temperature and medium is required to be pre-confirmed with professionals; pump cannot work with high temperature or corrosive fluids.
-
When pump is connected into circulation system, load current will be reduced to 70~85% of Max working current (opening outlet current).
-
The head means the Max vertical lifting height of water. The flow is 0L/MIN@max head.
-
The max flow rate means flow rate with no lifting height(according to the curve bellow)
|
Difference between 2phase & 3phase brushless DC pump
2phase
(T sub-series)
|
-
Hall sensor driving, circuit board should be placed inside pump body
|
3phase
(S/A sub-series)
|
-
NOTE that 3phase dc is completely different with 3phase AC; 3phase DC means 3 pairs of magnetic polarity & sensor-less, power supply the same with common DC pump(two wires: positive and negative)
-
Intelligent program-driving, sensor-less, circuit can be put outside of pump body (main factor that pump can be high-temperature resistant)
-
Speed adjustable by PWM, 0~5V signal or potentiometer(optional)
-
Lock protection,reverse-connected protection, over-vol.&over-current protection, over-temperature protection
-
Soft start, no current impact, can be contact directly with solar panel
|
Diagram of 3phase brushless DC pump connection
Dimensions of pump
production test
Exploded diagram of the product