High Tensile Strength Smooth Ep Nn Fabric Wear Resistant Rubber Conveyor Belt for Stone Crusher/Coal Mining
Product Desription
1.Types:EP80-EP630
2.Width:300MM-2300MM
3.Thickness:4-50mm
4.Tensile Strength:6MPA-25MPA
Standards
GB/T7984-2001, GB/T10822-2003, DIN22102, AS1332,JISK6322 etc
Features
Specifications
Grade | Tensile Strength | Elongation at Break | Maximum Abrasion Loss | Polymer / Rubber | Working Temperature Range | Application |
Heat Resistance | Mpa | % Minimum | MM3 | Degrees | ||
HRT1 | 12 | 350% | 200 | SBR Blend | + 100 Max for Fines | For hot materials such as crushed cement, foundry sand, fertilizers, clinker, coke etc. |
+ 125 Max for Lumps | ||||||
HRT2 | 12 | 350% | 180 | SBR Blend | + 125 Max for Fines | For hot materials upto 150 deg. Centigrade such as crushed cement, foundry sand, fertilizers, clinker, sinter, slack, coke etc. |
+ 150 Max for Lumps | ||||||
HRT3 | 13 | 350% | 130 | EPDM | + 150 Max for Fines | Very hot & abrasive materials as above upto 200 deg. centigrade |
+ 200 Max for Lumps |
Specifications:
Type |
Belt Surface Temperature |
Application |
1 |
50C~100C |
Suitable for the condition that requires heat resistant, but the materials' temperature is not so high. |
2 |
<=125C |
Suitable for the condition that requires abrasion resistant, the materials' temperature is proper, or for powdery materials with a not too high temperature. |
3 |
<=150C |
Suitable for the condition that requires high temperature resistant and high abrasion resistant |
4 |
150~200C |
Suitable for the condition that requires high temperature resistant and high abrasion resistant |
Fabric specs | Ply thickness (mm/P) | N/mm | Cover thickness | |||||
Strength series | ||||||||
2 ply | 3 ply | 4 ply | 5 ply | 6 ply | Upper | Bottom | ||
EP-80 | 0.8 | 160 | 240 | 320 | 400 | 480 | 2.0~8 | 0~4.5 |
EP-125 | 0.85 | 250 | 375 | 500 | 625 | 750 | ||
EP-150 | 0.9 | 300 | 450 | 600 | 750 | 900 | ||
EP-160 | 0.9 | 320 | 480 | 640 | 800 | 960 | ||
EP-200 | 1.05 | 400 | 600 | 800 | 1000 | 1200 | ||
EP-250 | 1.25 | 500 | 750 | 1000 | 1250 | 1500 | ||
EP-300 | 1.35 | 600 | 900 | 1200 | 1500 | 1800 | ||
EP-350 | 1.5 | - | 1050 | 1400 | 1750 | 2100 | ||
EP-400 | 1.8 | - | - | 1600 | 2000 | 2400 | ||
EP-500 | 2 | - | - | 2000 | 2500 | 3000 | ||
1. Specification
Belt width (mm) | Sidewall height (mm) | Cleat height (mm) | Effective belt width (mm) |
400 | 60 | - | |
80 | 70 | ||
100 | 90 | ||
120 | 100 | ||
500 | 60 | 250 | |
80 | 70 | ||
100 | 90 | ||
120 | 110 | ||
160 | 140 | ||
650 | 60 | 250, 300, 350 | |
80 | 70 | ||
100 | 90 | ||
120 | 110 | ||
160 | 140 | ||
200 | 180 | ||
800 | 60 | 350, 410, 460 | |
80 | 70 | ||
100 | 90 | ||
120 | 110 | ||
160 | 140 | ||
200 | 180 | ||
240 | 220 | ||
1000 | 60 | 460, 550, 640, 690, | |
80 | 70 | ||
100 | 90 | ||
120 | 110 | ||
160 | 140 | ||
200 | 180 | ||
240 | 220 | ||
300 | 270 | ||
1200 | 60 | 460, 550, 640, 690 | |
80 | 70 | ||
100 | 90 | ||
120 | 110 | ||
160 | 140 | ||
200 | 180 | ||
240 | 220 | ||
300 | 270 |
Rubber conveyor belt
1.Ply:1-10plies
2.Width:120-2200mm
3.Thickness: 6-40mm
4. Cover Tensile Strength: 9-25MPA
Specifiction/strength:
160N/mm-----3150N/mm
Width:
100mm---2200mm
Ep80 Ep100 Ep125 Ep200 Ep250 Ep300 Ep400 Ep500 Ep600
NN80 NN100 NN125 NN200 NN250 NN300 NN400 NN500 NN600
Advantage:
1.
Natural rubber Thin belt body with high strengt
h, light weight.
2. Anti-abrasive, impact resistant, corrosion resistant
3. Softy belt body, good flexibility, excellent trough.
4.
Vulcanization molding
5.
Long service life
Features
1.Excellent elasticity
2.Anti-impact
3.High-adhesion
4.Good flexibility
5.Trough ability
6.Better stability of size
7.Resistance to water
A
pplication
rubber conveyor belt
is widely used in
Harbour (port),
Metallurgy, Mining, Electricity, Coal, Foundries, Construction, Food, Cement, Fertilizer, Copper, Pig Iron Ores, Sponge Iron Reserves etc
.
rubber conveyor belt has over 10 key types according to the use classification:
Standards | Cover Rubber | Adhesion | |||||
Tensile Strength | Elongation at break | Abrasion | Cover to Ply | Cover to Ply | |||
DIN 22102 | Mpa | % | mm3 | N/mm | N/mm | ||
(<=1.5mm) | (>1.5mm) | ||||||
DIN 22102-Z | 15 | 350 | 250 | 3.5 | 4.5 | ||
DIN 22102-W | 18 | 400 | 90 | 3.5 | 4.5 | ||
DIN 22102-Y | 20 | 400 | 150 | 3.5 | 4.5 | ||
DIN 22102-X | 25 | 450 | 120 | 3.5 | 4.5 | ||
Standards | Cover Rubber | Adhesion | |||||
Tensile StrengTD | Elongation at break | Abrasion | Cover to Ply | Cover to Ply | Ply to Ply | ||
AS 1332 | Mpa | % | mm3 | N/mm | N/mm | N/mm | |
(<=1.9mm) | (>1.9mm) | ||||||
AS 1332-N17 | 17 | 400 | 200 | 4 | 4.8 | 6 | |
AS 1332-M24 | 24 | 450 | 125 | 4 | 4.8 | 6 | |
Standards | Cover Rubber | Adhesion | |||||
Tensile StrengTD | Elongation at break | Abrasion | Cover to Ply | Cover to Ply | Ply to Ply | ||
RMA | Mpa | % | mm3 | N/mm | N/mm | N/mm | |
(<=1.6mm) | (>1.6mm) | ||||||
RMA-I | 17 | 400 | 3 | 4.4 | 4 | ||
RMA-II | 14 | 400 | 3 | 4.4 | 4 | ||
Standards | Cover Rubber | Adhesion | |||||
Tensile StrengTD | Elongation at break | Abrasion | Cover to Ply | Cover to Ply | Ply to Ply | ||
SANS 1173 | Mpa | % | mm3 | N/mm | N/mm | ||
A | 18 | 400 | 70 | 5 | 7 | ||
C | 20 | 400 | 150 | 5 | 7 | ||
M | 25 | 450 | 120 | 5 | 7 | ||
N | 17 | 400 | 150 | 5 | 7 |
Application