Efficient Stain Resistance Soaping Agent Rg-Hfzl1420 for Reactive Printing

Model NO.
RG-HFZL3560
Solubility
Can Be Mixed with Water in Any Proportion
Solid Content
35%
Main Components
High Molecular Polymer
Density
1.02-1.08g/cm3 (20ºC)
pH Value
6.0-8.0 (10% Aqueous Solution)
Transport Package
Plastic Drum
Specification
50kg, 125kg, 160kg
Trademark
Ruiguang
Origin
Weifang, China
HS Code
3906909000
Production Capacity
50000mt/Year
Reference Price
Please contact us for quote
Contact Us

Product Description

Soaping Agent RG-HFZL1420

Product overview:
Anti-staining soaping agent RG-HFZL1420 is applied to wash reactive dyes, it has excellent soaping and stain resistance property in high concentrate electrolyte and high hardness condition. It can be widely used, saving water and energy, shorting process and enhancing productivity.

Main components:
High molecular polymer

Physical and chemical index:
Appearance: Light yellowish to brown viscous liquid
Density:           1.02-1.08g/cm3 (20 ºC )
PH Value:          6.0-8.0 (10% aqueous solution)
Ionicity:           Anionic / non-ionic
Solid content :    13.5-14.5%
Solubility:        Can be mixed with water in any proportion

Performance characteristic and application:
Anti-staining soaping agent RG-HFZL1420 is active both in acid and alkaline conditions, under conditions of high concentrate salt (about 20g/L) and hardness up to 3000mg/kg(3000ppm) can give full play to the soaping efficiency. It has strong affinity of hydrolyzed dyes, can prevent back-staining, also can short the soaping washing process significantly in the washing technology, and has those properties of saving water and energy, reducing sewage discharges. In addition to, this agent can also give the fabrics higher fastness consistency and reproducibility.
Anti-staining agent RG-HFZL1420 has the following characters:
  1. Anti-staining agent RG-HFZL1420 has excellent soaping property.
General requested the added salt concentration lower than 2g/L if the the traditional soaping agent want to get an excellent soaping effect, so to remove the fabric residual salt after dyeing, should wash repeatedly before dyeing and soaping washing. While anti-staining soaping agent RG-HFZL1420 due to its excellent soaping washing property, can give full play to excellent soaping effect under the condition of about 20g/L salt concentration, then obvious to short the washing process. In most cases, just wash one time after dyeing, then can proceed soaping wash.
If general soaping agent, often use surface-active agent and protective colloid etc., under the condition of water hardness is higher, the soaping effect declined obviously. But the anti-staining soaping agent RG-HFZL1420 can be full play excellent soaping effect even under the condition of harness up to 3000mg/kg, even use poor quality water ( for example harness up to 200mg/kg above), can still get excellent soaping effect.
  1. Excellent resistant to re-stain property.
Macromolecule of anti-soaping agent RG-HFZL1420 has the ability to trap hydrolyzed reactive dyes, can clad hydrolyzed dyes molecule, with the additional of affinity to hydrolyzed dyes, can firmly seal the hydrolyzed dye among in the soaping bath which enter into it in the soaping process, avoid concentrating of hydrolyzed dyes molecule and stick back to fibers or fabrics, so that has excellent resistant to re-staining property.
  1. Wide application range.
Anti-staining agent RG-HFZL1420 can be applied kinds of structure such as reactive dyes soaping wash after dyeing vinyl sulfone, monochloro triazine, fluoride triazine and two reactive groups and so on. Has remarkable effect to different dye concentration, and kinds of dyeing equipment and fabric types (yarn, woven fabric and knitted fabric).

Application method:
Reactive dye widely used in cellulosic fiber fabric dyeing and printing. Reactive dye need soaping wash after dyeing or printing, so that can enhance its various fastness, common soaping agent has surface active agent type (such as industry soaping powder etc.), chelating type (such as polyacrylate) and blended type and so on. These soaping agent normally request the salt concentration of soaping bath under 2g/L when in reactive dye soaping process, and the water is soft water (hardness is under 100mg/kg(100ppm). If the salt concentration is higher, will occur "secondary dyeing" when heating temperature for soaping wash, thus will make the floating color like direct dyes to dye the fabric again. While hard water will make the water-soluble high floating color (hydrolyzed dyes) become to anti-soluble sediment, both of them will reduce the soaping agent anti-staining ability, then greatly influence soaping effective.    
When anti-staining soaping agent RG-HFZL1420 applied in reactive dye soaping, it still has excellent soaping property and resistant to re-staining property even under high concentration electrolyte and high hardness water conditions.
Furthermore, it has those advantages such as saving water and energy, enhance the productivity. For example in the after washing of pure cotton yarn, it can save 4 times of washing than common process, can short the process time about 30min; in after washing of pure cotton fabric, it can save 2 times washing than common process, and each performance index can reach to or a little higher than regular performance index.

Anti-staining soaping agent RG-HFZL1420 application process example:
 
  1. After washing process of yarn:
Fiber pure cotton yarn
Bath ratio:                 16:1
Dyeing recipe:              (%)
Reactive red EC             0.15
Reactive dark blue EC:       0.45
Reactive blue KN-R:         3.50
Sodium sulfate (g/L):         60
RCF caustic soda liquid (g/L):  3.0
Trisodium phosphate (g/L):    8.0

Traditional after wash technological process 
Washing (40 ºC ×5min) → Washing (40 ºC ×5min) → Acid neutralizing (15min) → Washing (40 ºC ×5min) → Washing (40 ºC ×5min) → Soaping (1g/L of Soaping agent, 98 ºC ×10min) → Washing (70 ~ 80 ºC ×5min)
→ Warm temperature washing (2 ~ 3min) → Warm washing (2 ~ 3min)

Our company recommended technological process: 
Acid neutralizing (3g/L of Acetic acid, 50 ºC ×15min) → Washing (40 ºC ×5min) → Washing (1.5g/Lof Anti-staining soaping agent RG-HFZL1420, 98 ºC ×10min) → Washing (80 ºC ×5min) → Washing (40 ºC ×2 ~ 3min)

Washing fastness test (Level) for pure cotton yarn reactive dyeing
  Washing fastness (ISO105-C03) Rubbing fastness

  		Dyed yarn
discoloring 		Cotton color staining Nylon color staining Dry rubbing Wet rubbing
National standard 3 ~ 4 3 ~ 4 - 3 ~ 4 3
Anti-staining soaping agent RG-HFZL1420 4 ~ 5 4 ~ 5 4 4 ~ 5 3
             

Compared the above two process, when use anti-staining agent
RG-HFZL1420 wash, can save common 4 times washing, reduce the sewage discharge, short process time for about 30 min, and enhance
productivity greatly.
 
  1. After washing process of pure cotton knitted fabric
  2. Bath ratio:                 9:1
  3. Dyeing recipe:              (%)
  4. Reactive yellow RNF        4.160
  5. Reactive RED 3BS:         5.000
  6. Reactive blue BB:          0.078
  7. Sodium sulfate (g/L):        90.00
  8. Trisodium phosphate (g/L):   9.00

Traditional after washing technological process
Washing (40 ºC ×5min) → Washing (40 ºC ×5min) → Acid neutralizing (10min) → Washing (95 ºC ×10min) → Washing (95 ºC ×10min) → Washing (60 ºC ×10min) → Washing (10min) → Fixing color → Softening
Our company recommended soaping technological process:
Washing (40 ºC ×5min) → Washing (1g/L of Anti-staining soaping agent RG-HFZL1420, 95 ºC ×10min) → Washing (1g/L of Anti-staining soaping agent RG-HFZL1420, 95 ºC ×10min) → Washing (60 ºC ×10min) → Washing (10min) → Fixing color → Softening
Washing fastness test (level) of pure cotton knitted fabric after dyeing
 
  Washing fastness
(AATCC2A,49 ºC ) 		Crabbing fastness
(AATCC8)
Dyed fabric
 discoloring 		Cotton fabric
staining color  		Dry
crabbing 		Wet
crabbing
Before fixing 4 ~ 5 4 ~ 5 4 ~ 5 3
After fixing 4 ~ 5 4 ~ 5 4 ~ 5 3

Pure cotton knitted fabric use Anti-staining agent RG-HFZL1420 to wash can save two times washing of regular process, reduce sewage
discharge, short process time about 30 min, each performance index
can reach to or a little better than clients common used washing
process, and can save water and energy, as well as high efficient.

Specific process should be appropriate adjusted according to test.

Package and Storage :      
50kg or 125kg plastic drum or according to clients demands.
Prevent from insolation and frozen, stored in room temperature. Sealed storage under temperature of 2-25 degree, the guarantee period can be 12 months.
Product should be used up as soon as possible once the package opened; packing should be tightly closed after use.

Why Choose us?
1, Stable quality.
2, Fast shipment.
3, Professional and experienced technicians.
4, Reasonable solution.
5, 24*7 hours online service.
 
Founded in 1999, Weifang Ruiguang Chemical is a scientific research and environmental protection enterprises manufacturing water-based coating, auxiliaries and ink. Headquartered in Weifang city, factories cover more than 70 thousand square meters, with annual output more than 50,000 MT various auxiliaries, pigment, etc.
Based on our advantage products textile auxiliaries, printing auxiliaries and pigment, we expanded our business on papermaking auxiliaries, leather auxiliaries, petroleum auxiliaries and water-based ink, etc. Products exported to Pakistan, Bangladesh, India, Thailand, Indonesia, etc, enjoys good reputation.
OUR MISSION: Creat value for customers  Realize dream for employees.
Efficient Stain Resistance Soaping Agent Rg-Hfzl1420 for Reactive Printing
Efficient Stain Resistance Soaping Agent Rg-Hfzl1420 for Reactive Printing
Efficient Stain Resistance Soaping Agent Rg-Hfzl1420 for Reactive Printing
Efficient Stain Resistance Soaping Agent Rg-Hfzl1420 for Reactive Printing

 

 

Textile Auxiliary Agent

PNEUTEC.IT, 2023