Benogy MPPT solar charger controller to maximize and regulate DC power from the solar array for charging the battery bank. The transformer-less design provides reliable power conversion in a compact size and with high efficiency. With aluminum housing, and an integrated interface system. It's light and handy, making installation easier. It's the ideal inverter for small PV planets, or individually for small houses, both indoors and outdoors.
*Pure sine wave inverter(ON/OFF grid)
*WIFI&GPRS available for IOS Android
*Inverter running without battery
*One-key restoration to the factory settings
* Built-in120A(for 3.6KW/4.2KW)120A(for 6.2KW)
* MPPT:max 62000w(for 3.6KW). max 6200W (for 6.2kw)
*MPPT: max 6200W(for 3.6kw),max 6200w (for 4.2KW),Max 6500W(for 6.2KW) solar charge
*High PV input voltage range(90~450VDC)
*Built-in anti-dust kit for harsh environment
*Smart battery charge design to optimize battery life.
*Double output
Model | BTI-VIII 3.6KW | BTI-VIII 4.2KW | BTI-VIII 6.2 KW |
Phase | 1-phase | ||
Maximum PV Input Power | 6200W | 6200W | 6500W |
Rated Output Power | 3600W/3600VA | 4200W | 6200W/6200VA |
Maximum Solar Charging Current | 120A | 120A | 120A |
Grid-Tie Operation | |||
PV Input(DC) | |||
Nominal DC Voltage/Maximum DC Voltage | 360VDC/500VDC | ||
Start-up Voltage/Initial Feeding Voltage | 60VDC/90VDC | ||
Maximum DC Voltage | 60VDC~450VDC | ||
Number of MPPT Trachers/Maximum Input Current | 1/23A | 1/23A | 1/23A |
Grid Output(AC) | |||
Output Voltage Range | 195.5~253VAC | ||
Nomal Output Current | 15.7A | 18.2A | 27.0A |
Power Factor | > 0.99 | ||
Feed-in Grid Frequency Range | 49~51 ± 1HZ | ||
Efficiency | |||
Maximum Conversion Efficiency(Solar /AC) | 98% | ||
Two load output power(2.0) | |||
Full load | 3600W | 4200W | 5000W |
Maximum main load | 3600W | 4200W | 5000W |
Maximum Second Load (Battery Mode) | 1200W | 1400W | 1666W |
Main Load cut off voltage | 22VDC | 22VDC | 44VDC |
Main load return voltage | 26VDC | 26VDC | 52VDC |
Off-grid operation | |||
AC input | |||
AC Start-up Voltage/Auto restart voltage | 120-140VAC/180VAC | ||
Acceptable input voltage range | 90-280VAC or 170-280VAC | ||
Maximum AC Input Curreny | 40A | 40A | 50A |
Nominal Operating Frequency | 50/60Hz | ||
Surge Power | 7200W | 8400W | 10000W |
Battery Mode Output(AC) | |||
Nomal Output Voltage | 220/230/240VAC | ||
Output Wavefrom | Pure Sine Wave | ||
Efficiency(DC to AC) | 94% | ||
Battery & Charger | |||
Nomal DC Voltage | 24VDC | 24VDC | 48VDC |
Maximum Solar Charging Current(Solar to AC) | 120A | 120A | 120A |
Maximum AC Charging Current | 100A | 100A | 100A |
Physical | |||
Dimension, DXWXH | 420*310*110 | ||
Carton Dimession ,DXWXH | 500*415*180 | ||
Net Weight(Kgs) | 8.8 | 8.9 | 9.8 |
Gross Weight(Kgs) | 10 | 10.1 | 11 |
Interface | |||
Communication port | Rs232/GPRS/WIFI | ||
Environment | |||
Operating temperature | -10 ºC to 55 ºC |
Q: What type of battery cell for a portable power station?
A:
Benogy portable power station applies A-grade Li-NiCoMn battery cell.
Q: what is the difference between lithium lion and lead acid batteries?
A:
1. Light weight: Lithium-iron batteries are approximately one-third the weight of lead-acid batteries.
2. Benogy portable power station nearly 100% efficient charge, allowing for the same amp hours both input and output.
3. Benogy portable power station 3000 circle life VS lead acid battery 500circle life or other brand lithium portable power station 1500 circle life
4. Environment Friendly, Nontoxic.
5. Cost: Despite the higher upfront cost of Lithium-lion batteries, the true cost of ownership is far less than lead acid when considering life span and performance.
Q: what's temperature range of charge and discharge?
A:
Charge temperature:
Charge Temperature: 0 to 45°C and Discharge Temperature: -20 to 65°C
Q: Can you offer OEM and ODM service?
A:
yes. Of course. Jiangsu Benogy has a top profession technical team for development and research to support our business partners' requirement.
Q: Can offer free sample?
A: Yes, the sample cost will be deducted in bulk order.