| Model number | SZ160T4RC | ||
|
Gross weight
|
107.5 kg |
Motor protection
|
Internal thermostat, ext. overload protector needed |
| Net weight | 92.16 kg | Mounting torque [Nm] | 21 Nm |
|
Approval standard
|
CE | Nominal cooling capacity at 50Hz | 34.5 kW |
| UL | Nominal cooling capacity at 60Hz | 45.5 kW | |
| Brand technique | After sale | Nominal heating capacity at 50Hz | 32.5 kW |
| Capacity control | Fixed speed | Number of starts per hour [Max] | 12 |
| Colour | Blue | Oil charge [L] | 4 L |
| Compressor power supply [V/Ph/Hz] | 400/3/50 460/3/60 | Oil drain | 1/4'' flare |
| Configuration code | Single | Oil drain torque [Nm] | 35 Nm |
| Connection type | Rotolock | Oil equalization | 3/8'' flare SAE |
| Description | SZ160-4 | Oil equalization torque [Nm] | 48 Nm |
| Diameter [mm] | 266 mm | Oil reference | 160SZ |
| Discharge connection height [mm] | 596 mm | Oil type | POE |
| Discharge connection mounting torque [Nm] | 110 Nm | Packaging height [mm] | 671 mm |
| Discharge connection pipe size [in] | 7/8 in | Packaging length [mm] | 470 mm |
| Discharge connection rotolock size [in] | 1 3/4 in | Packaging weight [Kg] | 671 kg |
| Discharge connection size [in] | 1 3/4 in | Packaging width [mm] | 370 mm |
| Discharge connection sleeve pipe size [in] | 7/8 in | Packing format | Single pack |
| Drawing number | 8551120b | Packing quantity | 1 |
| Economizer | No | Phase | 3 |
| Factory HP [bar] | 33 bar | Power connections | Screw 4.8 mm |
| Factory LP [bar] | 25 bar | Refrigerant | R134a |
| Fitting remark | (shipped with rotolock version only) | R404A | |
| Fitting sleeve | ODF | R407C | |
| Fitting standard | Rotolock | Refrigerant charge [kg] [Max] | 12.5 kg |
| Frequency [Hz] | 50/60 | Relief valve | None |
| Gauge port HP | None | Rotational speed at 50Hz [rpm] | 2900 rpm |
| Gauge port LP | Schrader | Rotational speed at 60Hz [rpm] | 3500 rpm |
| Generation code | C | Segment usage | Air conditioning |
| Glass mounting | Threaded | Shipped fittings | Suction and discharge solder sleeves, rotolock nuts and gaskets |
| Glass torque [Nm] | 50 Nm | Shipped instructions | Installation instructions |
| GP LP torque [Nm] | 15 Nm | Shipped mounting | Mounting kit with grommets, bolts, nuts, sleeves and washers |
| High side max pressure (Ps) | 34.3 bar | Shipped oil | Initial oil charge |
| High Side TS Max | 150 °C | Suction connection height [mm] | 180 mm |
| High Side TS Min | -35 °C | Suction connection mounting torque [Nm] | 130 Nm |
| High Side Volume | 1.7 L | Suction connection pipe size [in] | 1 3/8 in |
| High value of nominal voltage at 50Hz [V] | 400 V | Suction connection rotolock size [in] | 2 1/4 in |
| High value of nominal voltage at 60Hz [V] | 460 V | Suction connection size [in] | 2 1/4 in |
| High value of voltage range at 50Hz [V] | 440 V | Suction connection sleeve pipe size [in] | 1 3/8 in |
| High value of voltage range at 60Hz [V] | 506 V | Swept volume [cm3] | 216.6 cm³ |
| IP protection class | IP54 (with cable gland) | Technology | Scroll |
| Low side max pressure (Ps) | 25 bar | Test dif [bar] [Max] | 24 bar |
| Low Side TS Max | 54 °C | Test HP [bar] [Max] | 32 bar |
| Low Side TS Min | -35 °C | Test LP [bar] [Max] | 25 bar |
| Low Side Volume | 16.5 L | Torque earth [Nm] | 2 Nm |
| Low value of nominal voltage at 50Hz [V] | 380 V | Torque Ebox cover [Nm] | 2.3 Nm |
| Low value of nominal voltage at 60Hz [V] | 460 V | Torque power [Nm] | 3 Nm |
| Low value of voltage range at 50Hz [V] | 342 V | Total height [mm] | 631 mm |
| Low value of voltage range at 60Hz [V] | 414 V | Type | SZ |
| LRA | 150 A | Type designation | Compressor |
| Maximum Operating Current [MOC] | 29 A | Viscosity [cP] | 32 cP |
| MMT | 29 A | Winding resistance for three-phase compressors with identical windings [Ohm] | 0.94 Ohm |