Eye Bolt M16 350mm

Model NO.
M-350
Trademark
Oeipower
Origin
China Nangyang
HS Code
73269090
Production Capacity
100000
Reference Price
$ 0.81 - 0.90
Contact Us

Product Description

TYPE:APG-B4
NAME:Parallel groove clamp APG-B4
Specification
  Al 25-240mm²      Size 62*58mm   Double-bolts  Bolt M10*60  Weight 280g
3.6 The throat of the staple will present a
diameter range  		mm 26.42
3.7 Throat Suspension Clamp 
support must have curvature, to allow an angle of entry and exit 
from the driver,  		º 30º
3.8 Suspension clips present a 
breaking load  		kg 11,340
3.9 Minimum weight of zinc deposited in the 
hot galvanized steel  		g/m² 915
3.10 Minimum weight of zinc deposited in 
bolts, nuts and washers  		g/m² 400
3.11 Dimensions and drawings mm yes
3.12 ASTM standards   ASTM 123/153

Material

Connector bodies made of corrosion resistant, high strength aluminum alloy 99.5
Bolts: DIN 933, steel 8.8, dacromet; Nut: DIN934, dacromet, pressed into lower part
Pressure pad: aluminum alloy; Spring washer: DIN127, steel
Conical washer/Spring washers: Steel, DIN6796 corrosion-protected, dacromet

3 Catalog and manufacturer reference code   Specify code and attach technical catalog of the model proposed by the manufacturer
4 Name of the material   Pletina stanchion 1-1 / 4 "x1 / 4" x28 "
5 Material   Steel
7 Finished   Galvanized in hot dip, manufactured in one piece free of cracking, free of defects, burrs
8 Manufacturing standard   ASTM-A36, ASTM A36M,, ASTM- A123 ,ASTM A153
  Overall dimensions inch(mm) 1 1/4 x 1/4 x 28(31.75 x 6.35 x 711.2)
9 Length inch(mm) 28(711.2)
10 Thickness inch(mm) 1/4(6.35)
11 Width inch(mm) 1 1/4(31.75)
12 Dimension of holes in ends: 
to. Hole A (end towards crosshead)  		inch(mm) 0.562(14.28)
13 Dimension of holes in ends: 
b. Hole B (end towards pole)  		inch(mm) 0.437(11.11)
14 Weight lbs 2.15
15 Identification mark   Each strut must present the engraved 
symbol of the manufacturer 
16 Packaging   In a group of 25 units the struts of 
Plates should be tied at each end and then packed in a highly resistant cardboard box for transport, storage and handling. 
4.3 The body material will be alloy
of aluminum, bolts, washers and nuts of the fastening system of the staple will be
hot dip galvanized forged steel  		  yes
4.3 ACSR 556 conductor diameter. 
4MCM not including the rod  		mm 23.54
4.5 Breaking load kg  
4.6 The compression type anchor clips 
for the conductor must be supplied with a connection terminal that can be bolted  		  0° o 30°.
4.7 Weight of zinc deposited on steel g/m² 915 g/m².
4.8 Zinc weight deposited on bolts, nuts and washers g/m² 400 g/m².
 
4.9 Weight kg  
4.1 Dimensions and drawings   yes
4.11 ASTM standards   ASTM 123/153
4.12 Attach to the staple   Norma IEC 60471.


Stainless steel A2 bolts and nuts available according to order.
 

6.3 The construction material of the 
splice must be aluminum and aluminum alloy must contain a maximum of 0.1% copper  		  yes
6.4 ACSR conductor section 
556.4MCM  		mm² 327.93
6.5 Length m  
6.6 Breaking load kg  
6.7 Repair splices for the 
conductor must be preformed rods of the Armor Splice Full type 
Tension." 		  yes
6.8 Each rod that forms the joint 
must have a mark in its center with indelible ink  		  yes
6.9 Weight per unit kg  
Eye Bolt M16 350mm Eye Bolt M16 350mm Eye Bolt M16 350mm Eye Bolt M16 350mm Eye Bolt M16 350mm Eye Bolt M16 350mm Eye Bolt M16 350mm Eye Bolt M16 350mm Eye Bolt M16 350mm Eye Bolt M16 350mm
5 Material    Steel
6 Finished   Bolt all threads and nuts 
they should have smooth surfaces and 
free of splinters, which may affect their functionality After the galvanizing operation, a centrifugation operation will be carried out that helps to uniformize the zinc layer in all the threaded parts and eliminate excess zinc. The nuts must have been checked after hot-dip galvanizing according to ANSI / ASTM A153. 
7 Norm   ASTM A153, ASTM A‐307,
ANSI B18.1.2
8 Quality certificate   ISO-9001 or recent
9 Identification mark   Each bolt must present the symbol 
manufacturer 
10 Packaging   Bolts must be packed in a box 
of wood to protect it in handling, storage and transport. Each box must indicate the name of the material 
, manufacturer and quantity 
  Dimension    
11 Diameter inch(mm) 5/8 (15.87)
12 Long inch(mm) 18(457.2)
13 Minimum resistance kg(lb) 5,624(12,400)
14 Weight lbs 1.96
15 accessories   Each bolt must include four (4) 
square nuts 

 

Electric Power Fitting

PNEUTEC.IT, 2023