Mild Carbon Steel S35c/C35/1035 Forging Steel Tubes

Model NO.
1035/C35/S35C
Usage
Pipeline Transport, Boiler Pipe, Hydraulic/Automobile Pipe, Oil/Gas Drilling, Food/Beverage/Dairy Products, Machinery Industry, Chemical Industry, Mining, Construction & Decoration, Special Purpose
Section Shape
Round
Process
Eaf+Lf+Vd+Forged+Heat Treatment(Optional)
Technology
Hot Rolled/ Forged/ Cold Drawn
Form
Round Bars/ Flat Bar / Blocks/ Tube
Test
Ensile Strength, Yield Strength, Elongation
Certificate
ISO/ Mill Certificate
Surface
Black; Peeled; Polished; Machined; Grinded; Turne
Heat Treatment
Normalized;Annealed ;Quenched ;Tempered
Ut Standard
Sep 1921-84 D/D
Ex-Stock
No
Non-Metallic Inclusiton
ASTM E45
Grain Size
ASTM E112
Length
3000-5800mm
Delivery Date
30 Days
Payment Term
30% Tt Deposit, Balance Against Bl Copy
Transport Package
Seaworthy Package
Trademark
Qilu
Origin
China
HS Code
7228400000
Production Capacity
400, 000ton/Year
Reference Price
$ 810.00 - 1,215.00
Contact Us

Product Description

Mild Carbon Steel S35C/C35/1035 Forging Steel Tubes
Mild Carbon Steel S35c/C35/1035 Forging Steel Tubes
1: 1035 steel introduction
    AISI 1035 is a low-cost, tough, medium-strength steel ideal for general-purpose applications, AISI 1035 is a medium-carbon alloy that can be normalized, hot-rolled, and water- or oil-quenched before tempering. 
    1035 steel has a chloride threshold value the critical chloride concentration above which the steel will begin to corrode four to five times higher than that of carbon steel. 1035 (HR) - Intermediate carbon higher in strength and hardness than low carbon steel. Used for studs, bolts etc. Water-hardening steels suitable for small parts of moderate strength. Used in levers, bolts, nuts, studs, and similar parts which are headed, upset, or extruded. 
    One of the most widely used precipitation hardening grades in the business. While soft and ductile in the solution annealed condition, it is capable of high properties with a single precipitation or aging treatment. Characterized by good Corrosion resistance, high harness, toughness and strength.
 
2: 1035 Steel equivalent
Country China Japan Germany USA UK
Standard GB/T 699 JIS G4051 DIN (W-Nr.)
EN 10083-2 		AISI/ASTM
ASTM A20 		EN / BS
Grade / S35C C35 1035 / 

3: 1035 steel chemical composition
Grade C Si Mn P S Ni Cr  Cu
S35C 0.32 - 0.38 0.15 - 0.35 0.6 - 0.9 0.03 max 0.035 max 0.2 max 0.2 max 0.3 max
C35 0.32 - 0.39 0.10-0.40 0.5 - 0.8 0.045 max 0.045 max / 0.4 max /
1035 0.32 - 0.38 / 0.60 - 0.90  0.04 max 0.05 max / / /
 
4: 1035 steel mechanical properties   

    The mechanical properties mainly include tensile strength, yield strength, elongation, area or reduction, hardness, impact value, non-metalic inclusion etc. Different heat treatment, the mechanical properties will be different, such as normalized, tempered, QT. If you want to know the properties, kindly contact the salesman.

 

5: 1035 steel overviews

 

Size Round Dia 6-1200mm
Plate/Flat/Block Thickness
6mm-500mm
Width
20mm-1000mm
Heat treatment Normalized ; Annealed ; Quenched ; Tempered
Surface condition Black; Peeled; Polished; Machined; Grinded; Turned; Milled
Delivery condition Forged; Hot rolled; Cold drawn
Test Tensile strength, Yield strength, elongation, area of reduction, impact value, hardness, grain size, ultrasonic test, US inspection, magnetic particle testing, etc. 
Payment terms T/T;L/C;/Money gram/ Paypal
Trade terms FOB; CIF; C&F; etc..
Delivery time 30-45 days
Application 1035 are used for   Tools, Bulldozer edges, Drawing, Cold extrusion, Chain pins, Sealing rings, Track links, Nails, Couplings, Levers, Studs, Trusses, Gears, Bolts, Rods, Pins, Shafts, Axles.
 

 

6.Heat Treatment
Annealing
     Full annealing of small C1035 forgings is carried out from 1550-1625oF (840-890oC) followed by furnace cooling at 50oF (28oC) per hour, to 1200oF (650oC) soaking and air cooling.
Normalizing
     The normalizing temperature range for this grade is typically 1600-1650oF (870-900oC.)
     Normalizing is followed by cooling in still air. When forgings are normalized before hardening and tempering or other heat treatment, the upper range of the normalizing temperature is used. When normalizing is the final treatment, the lower temperature range is used.
Hardening
     Hardening of this grade is carried out from an austenitizing temperature of 1525-1575oF (830-860oC) and oil or water quenching.
Flame and induction hardening may be carried out by heating quickly to the desired case depth and quenching in water or oil. This should be followed by a tempering treatment at 300-400oF (150-200oC) to reduce stresses in the case without affecting its hardness. A surface hardness of Rc 50 may be obtained by this treatment.
Tempering
     Tempering after normal hardening and oil or water quenching is carried out at 750-1260 oF (400-680oC) to give the required mechanical properties as determined by practical experience.

 

7: Delivery condition
    For hot forged bar, usually the delivery condition is hot forged, annealed/QT rough turned/Black surface.
     For hot rolled bar, usually the delivery condition is hot rolled, annealed/QT, Black surface.
     For hot forged plate, usually the delivery condition is hot forged, annealed/QT, milled surface
     For hot rolled plate, usually the delivery condition is hot rolled, annealed/QT, black surface.

 

 

Mild Carbon Steel S35c/C35/1035 Forging Steel Tubes Hunan Qilu Industrial Co., Ltd has the capacity to forge round steel, steel flat, square steel, module, shaft and roller, etc. The main specifications of the products include Φ80-1000mm forging materials and 80-1200mm square billets and which the maximum piece weight can reach 50T.

Mild Carbon Steel S35c/C35/1035 Forging Steel Tubes
Mild Carbon Steel S35c/C35/1035 Forging Steel Tubes
Hunan Qilu Industrial Co., Ltd were already engaged in exporting steel for 11 years, could supply a great variety of hot forged, hot rolled and cold drawn Steels,  including engineering steel, cold work tool steel, hot work tool steel, plastic mold steel, spring steel, high speed steel, stainless steel etc., besides Qilu Industrial also has their own heating treatment shop and machining shop to provide heating and cutting service.

Since 2008 year, Hunan Qilu Industrial has the right to export all FORGED STEEL behalf of Qilu Speical Steel Co.,ltd which is specialized in smelting and forging of special steel since 1965 year, now Qilu special steel is one of the biggest manufacturer of forged product in China.The forged products are used in Automotive, Aerospace, Power Generation, Oil & Gas, Transportation and Industrial. We already set up the warehouse in Wuxi and Dongguan city, more than 20000 tons ex-stock could be supplied with kinds of size.

Qilu Industrial is the professional one-stop steel manufacturer, stockist and exporter in China, our customers spread all over the world, include West Europe, North America, South America, Asia, Middle Asia, Africa, Australia, etc.

Mild Carbon Steel S35c/C35/1035 Forging Steel Tubes
Mild Carbon Steel S35c/C35/1035 Forging Steel Tubes The company owns advanced special steel smelting facilities and forging processing equipments, the main steel-making equipment include 2 sets of 50t ultra-high power electric arc furnaces,2 sets of 60t LF refining furnaces,1 set of 60t vacuum degassing refining furnace and 4 sets of 1-20t electroslag re-melting furnaces.
The main forging equipments mainly include:3 sets of 5t electro-hydraulic hammers, 1 set of high-speed forging units of 800t,1600t,2000t and 4500t respectively.

Mild Carbon Steel S35c/C35/1035 Forging Steel Tubes
Mild Carbon Steel S35c/C35/1035 Forging Steel Tubes
Mild Carbon Steel S35c/C35/1035 Forging Steel Tubes Hunan Qilu Industrial CO., LTD

 

Steel Pipe & Tube

PNEUTEC.IT, 2023