| Product Name | Specification | Material |
|
| Domino Connector, Long | 6.0/6.0 | T |
| Product Name | Specification | Material |
| SINO Monoaxial Pedicle Screw | 4.0×25/30/35/40 mm | T |
| 4.5×25/30/35/40/45 mm | T | |
| 5.0×30/35/40/45/50 mm | T | |
| 5.5×25/30/35/40/45/50 mm | T | |
| 6.0×25/30/35/40/45/50/55 mm | T | |
| 6.5×25/30/35/40/45/50/55/60/65 mm | T | |
| 7.0×30/35/40/45/50/65 mm | T | |
| 7.5×25/30/35/40/45/50/60/65 mm | T | |
| SINO Polyaxial Pedicle Screw | 4.0×25/30/35/40 mm | T |
| 4.5×25/30/35/40 mm | T | |
| 5.0×30/35/40/45 mm | T | |
| 5.5×30/35/40/45/50/55 mm | T | |
| 6.0×30/35/40/45/50/55/60 mm | T | |
| 6.5×35/40/45/50/55 mm | T | |
| 7.0×30/35/40/45/50 mm | T | |
| 7.5×30/35/40/45/50 mm | T | |
| SINO Monoaxial Reduction Screw | 4.0×25/30/35/40 mm | T |
| 4.5×30/35/40/45 mm | T | |
| 5.0×30/35/40/45/50 mm | T | |
| 5.5×30/35/40/45/50 mm | T | |
| 6.0×30/35/40/45/50/55 mm | T | |
| 6.5×30/35/40/45/50/55 mm | T | |
| 7.0×30/35/40/45/50 mm | T | |
| SINO Polyaxial Reduction Screw | 4.0×30/35/40 mm | T |
| 4.5×30/35/40/45 mm | T | |
| 5.0×30/35/40/45 mm | T | |
| 5.5×30/35/40/45/50 mm | T | |
| 6.0×30/35/40/45/50 mm | T | |
| 6.5×30/35/40/45/50 mm | T | |
| 7.0×30/35/40/45 mm | T | |
| Rod | 6.0×40/45/50/60/70/80/90/100/110/250/500 mm | T |
| SINO Set Screw | 6.0 mm | T |
| Domino Connector, Long | 6.0/6.0 mm | T |
| Domino Connector | 6.0/6.0 mm | T |
| Crosslink Plate | 6.0×55/60/65/70/75/80 mm | T |
| Crosslink Plate -1 | 6.0×55/60/65/70/75/80 mm | T |
| Crosslink Plate -2 | 6.0×28-31 mm | T |
| 6.0×30-35 mm | T | |
| 6.0×35-44 mm | T | |
| Crosslink Plate -3 | 6.0×35-44 mm | T |
| 6.0×43-54 mm | T | |
| 6.0×53-73 mm | T | |
| SINO Hook | Pedicle Hook | T |
| Lamina Hook | T | |
| Transverse Process Hook | T | |
| SINO Instrument Set A | See the table | SS |
| SINO Instrument Set B | See the table | SS |
| SINO Special Instrument Set A | |||
| Items | Description | Specification | Qty |
| 1 | Awl | 2.45 | 1 |
| 2 | Probe,Straight | Ø 2.5 | 1 |
| 3 | Probe,Straight | Ø 3.2 | 1 |
| 4 | Probe,Curved | Ø 3.5 | 1 |
| 5 | Double End Probe | SØ1.95 | 1 |
| 6 | Hard Probe | SØ1.95 | 1 |
| 7 | Tap | M4.5 | 1 |
| 8 | Tap | M5.5 | 1 |
| 9 | Tap | M6.5 | 1 |
| 10 | Tap | M7 | 1 |
| 11 | Multi-axial Screw Hex driver | M10 | 1 |
| 12 | Fix Angle Screws Driver | M10 | 1 |
| 13 | Ratchet Handle | 6.3 | 2 |
| 14 | 20cm Template Rod | 200 | 1 |
| 15 | Plug Starter | SW4.5/SW3.5 | 2 |
| 16 | Rod Bender | 5.5/6.0 | 1 |
| 17 | Rod Holder | 5.5/6.0 | 1 |
| 18 | Rod Pusher | 5.5/ 6.0 | 1 |
| 19 | Rocker | 6.0 | 1 |
| 20 | Counter Torque | 6.0 | 1 |
| 21 | Rod Reducer Plier | M10 | 1 |
| 22 | T-handle | 6.3 | 1 |
| 23 | Rod Rotation Forcep | 6.0 | 1 |
| 24 | Rod Rotation Wrench | SW4.0 | 1 |
| 25 | T-handle | SW4.5 | 1 |
| 26 | Multi-axial Reduction Screw Hex Driver | M10 | 1 |
| 27 | Fix Angle Reduction Screws Driver | M10 | 1 |
| 28 | Rod Reducer Plier-Reduction Extension Sleeve A | 7mm | 1 |
| 29 | Rod Reducer Plier-Reduction Extension Sleeve B | 14mm | 1 |
| 30 | Reduction Screw Rocker | 6.0 | 1 |
| 31 | Reduction Tab Breaker | 6.0 | 1 |
| 32 | Curved Distractor | 5.5/6.0 | 1 |
| 33 | Distractor | 5.5/6.0 | 1 |
| 34 | Curved Compressor | 5.5/6.0 | 1 |
| 35 | Torsion Driver | 11Nm-SW4.5 | 1 |
| 36 | Fixed Pin Driver | SW3.5 | 1 |
| 37 | Cylinder Fixed Pin | 3 | |
| 38 | Ball Fixed Pin | 3 | |
| 39 | Crosslink Driver | SW3.5 | 1 |
| 40 | Counter Reduction Sleeve Wrench | 6.0 | 1 |
| 41 | Crosslink Plate Holder | 1 | |
| 42 | Crosslink plate holder | 1 | |
| 43 | Holding Forcep | 1 | |
| 44 | Power Gripper(order seperately) | 1 | |
| 45 | Instrument Case 1 | 1 | |
| SINO Instrument Set B | |||
| Items | Description | Specification | Qty |
| 1 | Rod Rotation Forcep | 6.0 | 1 |
| 2 | Sagittal Plane In-Situ Bender Left | 6.0 | 1 |
| 3 | Sagittal Plane In-Situ Bender Right | 6.0 | 1 |
| 4 | Coronal Plane In-Situ Bender Left | 6.0 | 1 |
| 5 | Coronal Plane In-Situ Bender Right | 6.0 | 1 |
| 6 | Template Rod 500mm | 500 | 1 |
| 7 | Curved Hook Holder | 6.0 | 1 |
| 8 | Instrument Case 2 | 1 | |
Q 1.
Are you trading company or manufacturer?
A:
We are manufacturer located in
Weihai Shandong
China.
Q 2.
How about your delivery time?
A:
Generally 7-15 days if stock available and 30-45 days if regular production needed.Depending on order quantity, product type, and other order factors and requirements.
Q 3.
What is the delivery way?
A: Normally we send through courier like DHL, FEDEX,TNT, UPS,etc or post upon request from clients.
Q 4.
Do you provide samples ? Is it free or extra ?
A:
Yes, we could offer the sample and we will give the best price to you of the samples.
Q 5.
What is your payment method?
A: T/T.
Q 6.
What is the return policy?
A:
For defective goods, please send us the picture to confirm then we will give you the replacement.