Engine model | 6BT5.9-G2 |
Generator model | Stanford,S1L2-Y1 |
Enging Rated Power | 90kVA 100kw |
Standard configuration |
Generator parameters | |||||
Voltage (V) | Frequency (Hz) | phase sequence | Power factor | Rated current (A) | Generator Prime Power (kW/kVA) |
400/230 | 50 | 3 | 0.8 | 144 | 90KW /112.5KVA |
Sales commitment |
Engine parameters | |
Introduction of basic Parametes | |
Engine Model | 6BT5.9-G2 |
Spray pattern | PT Direct injection |
Number/arrangement of cylinders | 4/L |
D isplacement / L | 3.9 L |
Cylinder diameter × stroke ( mm ) | 102*120 ( mm ) |
Rated speed rpm | 1500 |
Engine standby power kW /KVA | 100/125 |
Engine rated power kW /KVA | 80 |
S peed regulating system | E lectron speed regulator |
Generator parameters |
Generator technical parameters | |
Generator Model | MY POWER80-1-4/MY POWER 100-1-4.1 |
P hase sequence | 3 |
Wiring method | Three-phase four-wire, Y-type winding |
Number of bearings | 1 |
Power factor | 0.8 |
T he protection grades | IP2 3 |
Altitude requirement | ≤1000m |
F ield excitation | Brushless self-excitation |
Insulation Grade/Temperature Rise Grade | H/H |
Maximum overspeed | 2250 rpm /min |
Power | 80KW/100KVA |
G enerator efficiency | ≥ 95 % |
Voltage | 400V |
Generator set parameters | |
Voltage setting range | ≥± 10 % |
Steady state voltage regulation rate | ≤ 0.5 % |
Transient voltage deviation (100% sudden power reduction) | ≤+ 17 % |
Transient Voltage Deviation (40% Sudden Power) | ≤- 6.5 % |
Voltage Stability Time (100% Sudden Power Reduction) | ≤ 2.8 S |
Voltage Stability Time (40% Sudden Power) | ≤ 2.5 S |
Frequency adjustment range | ≥±5 % Adjustble |
Frequency volatility | ≤±0.25% |
Transient frequency deviation (100% sudden power reduction) | ≤+ 8 % |
Transient frequency deviation (40% sudden power) | ≤- 5 % |
Frequency Recovery Time (100% Sudden Power Reduction) | ≤ 1.48 S |
Frequency recovery time (40% sudden power) | ≤ 1.35 S |
Quality Standard for Generator Sets |
Diesel generator sets are designed, produced and tested strictly in accordance with the standards and can be used in various environments, meeting the following relevant standards : |
ISO9001 |
Data | |||
Atlas of Engine Parts and Original Factory Data | Generator Unit Maintenance Record Manual | ||
Generator factory information | Installation and Operation Manual of Generator Set | ||
Original factory data of control system | Acceptance Form for Installation and Commissioning of Generator Sets | ||
Original Factory Test Report of Generator Set | Certificate of Origin of Generator Set | ||
Optional accessories | |||
Engine | Generator | Electrical system | |
Intermediate water heating
|
Anti-condensation heater
|
Anti-condensation heater
|
|
Oil preheater
|
Permanent magnet excitation system
(PMG)
|
Unit control screen with three remote functions
|
|
Air starting motor
|
Voltage Sag (Parallel)
|
ATS automatic load transfer screen
|
|
Heavy Air Filter for Desert
|
Generators of other temperature rise grades
|
Full-automatic parallel screen for multiple units
|
|
Heavy duty secondary muffler
|
RTD temperature sensor, 2 per phase
|
Remote control system separate from unit
|
|
Fuel system | Other | Cooling system | |
Base tank
|
Rain-proof unit
|
Split water tank
|
|
Oil - water separator
|
Static sound box generator set
|
Remote water tank
|
|
Fully automatic oil supply system
|
Vehicle-mounted power generation vehicl
|
Heat exchanger and external circulation cooling tower
|
|
Buried fuel tank
|
Towing generator set
|
Marine cooling system
|