Mfe711 Vinyl Ester Resin Bisphenol-a Epoxy Resin for Corrosion Resistant FRP Products

Model NO.
711
Molecular Principal Chain
Heterochain Polymer
Color
Yellow
Styrene Content
42-48%
Viscosity
250-450 Cps
Transport Package
IBC/Drum
Specification
1000kg/IBC 200kg/Drum
Trademark
JLON
Origin
China
HS Code
3907910000
Production Capacity
10000ton/Year
Package Size
50.00cm * 50.00cm * 50.00cm
Package Gross Weight
50.000kg
Reference Price
$ 22.50 - 40.50
Contact Us

Product Description

MFE 711 is based on bisphenol-A epoxy resin, provides resistance to a wide range of acids, alkalis, bleaches and solvents used in many chemical processing industry applications.
Benefits & Properties
•Easier workability, good air drying.
•Shorter gel-to-cure interval, reduced stress cracking,
•The resin's improved reactivity properties often permit an increase in the lay-up thickness per session.
•Higher elongation provides FRP equipment with increased toughness
•Lighter color makes defects easier to see and correct while the resin is still workable.
•Longer shelf life provides additional flexibility to fabricators in storage and handling.
 
Mfe711 Vinyl Ester Resin Bisphenol-a Epoxy Resin for Corrosion Resistant FRP Products
 
Mfe711 Vinyl Ester Resin Bisphenol-a Epoxy Resin for Corrosion Resistant FRP Products
Applications and Fabrication Techniques
•FRP storage tanks, vessels, ducts, and on-site maintenance projects, particularly in chemical processing and pulp and paper operations.
•The resin is designed for ease of fabrication using hand lay-up, spray-up, filament winding, compression molding and resin transfer molding techniques, pultrusion and molded grating applications.
•When properly formulated and cured, complies with FDA regulation 21 CFR 177.2420, covering materials intended for repeated use in contact with food.



Typical Liquid Resin Properties
Property (1)Value
AppearanceLight yellow
Viscosity cPs@25ºC
Brookfield 63@60rpm		250-450
Styrene Content42-48%
Shelf Life(2) Dark, 25ºC10 months

(1) Typical property values only, not to be construed as specifications
(2) Unopened drum with promoters. Shelf life specified from date of
 Manufacture

Typical Properties (1) Resin Clear Casting (3)
PropertyValueTest Method
Tensile Strength/ MPa80-95ASTM D-638
Tensile Modulus/ GPa3.2-3.7ASTM D-638
Elongation at break / %5.0-6.0ASTM D-638
Flexural Strength/ MPa120-150ASTM D-790
Flexural Modulus / GPa3.3-3.8ASTM D-790
HDT (4)100-106ASTM D-648
Method A

 (3) Cure schedule: 24 hours at room temperature; 2 hours at 120ºC(4) Maximum stress: 1.8 MPa
Safety and Handling Consideration
This resin contains ingredients which could be harmful if mishandled. Contact with skin and eyes should be avoided and necessary protective equipment and clothing should be worn.
The specification is 2014 edition and may change with the technological improvement.
MSDS contain health and safety information for your development of appropriate product
handling procedures to protect your employees and customers.
Our MSDS should be read and understood by all of your supervisory personnel and employees before using our products in your facilities.
Mfe711 Vinyl Ester Resin Bisphenol-a Epoxy Resin for Corrosion Resistant FRP Products
 
Mfe711 Vinyl Ester Resin Bisphenol-a Epoxy Resin for Corrosion Resistant FRP Products

Package: 200 kg per drum or 1000 kg per IBC

Recommended Storage:
Drums - Store at temperatures below 25ºC. Storage life decreases with increasing storage temperature. Avoid exposure to heat sources such as direct sunlight or steam pipes. To avoid contamination of product with water, do not store outdoors. Keep sealed to prevent moisture
pick-up and monomer loss.

Mfe711 Vinyl Ester Resin Bisphenol-a Epoxy Resin for Corrosion Resistant FRP Products

Mfe711 Vinyl Ester Resin Bisphenol-a Epoxy Resin for Corrosion Resistant FRP Products



 

 

Polymer & Resin

PNEUTEC.IT, 2023