Model | IPS -SP12-83.3 | IPS -SP24-42 | IPS -SP48-21 | IPS -SP150-6.7 | IPS -SP220-4.5 | IPS -SP250-4 | IPS -SP300-3.3 | |
Item | Technical indicators | |||||||
Output | DC voltage | 12 V DC | 24VDC | 48VDC | 150VDC | 220VDC | 250VDC | 300VDC |
Rated current | 0 ~83.3 A | 0 ~42 A | 0 ~21 A | 0 ~6.7 A | 0-4.5A | 0~4A | 0~3.3A | |
Rated power | 1000W | |||||||
Ripple and noise | <150mV | <150mV | <240mV | <240mV | <240mV | <240mV | <240mV | |
Voltage accuracy | ±1% | |||||||
Output voltage regulation range | 0 ~12VDC | 0 ~24 V DC | 0 ~48 V DC | 0~6.7 V DC | 0~4.5VDC | 0~4VDC | 0~3.3VDC | |
Load adjustment rate | 0.3% | |||||||
Linear adjustment rate | 0.5% | |||||||
Input | Voltage range | 180-264VAC 340-440VAC;254VDC~370VDC | ||||||
Efficiency (typical) | >85% | |||||||
Working current | 220VAC;21A | |||||||
Impulse current | 60A 230VAC | |||||||
Start, rise, hold time | 2000ms,50ms,20ms;230VAC | |||||||
Protect | Over-temperature protection | 105% ~ 135% type; Constant current output + V0 drop Undervoltage point cut-off output reset; Power on again | ||||||
Over-temperature | RTH3; The fan operates normally, ≥ N90°C, and the output is closed | |||||||
E nvironment | Operating temperature, humidity | -10°C ~ +50°C;20%-90RH | ||||||
Storage temperature, humidity | - 20°C~+85°C;10%~95RH | |||||||
Safety regulations | Withstand voltage | Input - output: 1.5kVac input housing: 1.5kVac output housing: 05kvac for 1 minute | ||||||
Leakage current | Input-output 1.5KVAC Time< 6mA | |||||||
Leakage current | Input-output 220VAC Time< 1.5mA | |||||||
Isolation resistance | Input - output, input - housing, output - housing, 500VDC/100M Ω | |||||||
O ther | S ize | 291 * 132 * 68(MM) | ||||||
N W/GW | 3KG/4.5KG |