| Genset Specification | |
| Model | CM60R7N |
| Diesel engine model | CMR6105NIZ |
| Alternator model | Henjo |
| Control panel | Smartgen |
| Rated power (kW) | 60 |
| Rated voltage (V) | 400 |
| Rated frequency (Hz) | 50/60 |
| Power factor | 0.8 |
| Connection mode | Three-phase four-wire, star connection |
| Protection class | IP23 |
| Insulation class | H |
| Voltage steady-state adjusting rate (%) | ±2.5 |
| Voltage transient-state adjusting rate (%) | -15~+20 |
| Voltage stable time (S) | 1.5 |
| Voltage fluctuation rate (%) | 0.5 |
| Voltage regulation range (%) | 95-105 |
| Frequency steady-state adjusting rate (%) | 5 |
| Frequency transient-state adjusting rate (%) | ±10 |
| Frequency stable time (S) | 7 |
| Frequency fluctuation rate (%) | 0.5 |
| Dimension L*B*H (mm) | 2200x900x1400 |
| Net weight (Kg) | 1250 |
| Natural Gas Engine Specification | |
| Model | CMR6105NIZ |
| Rated power (kW) | 75 |
| Speed (rpm) | 1500 |
| Idle speed (rpm) | 700 |
| Type | Four-stroke, turbocharged, inlet air cooling, spark ignition,external-mixing electronic control |
| No. and layout of cylinders | 6 in line |
| Cylinder bore (mm) | 105 |
| Piston stroke (mm) | 135 |
| Displacement (L) | 7.01 |
| Compression ratio | 10.5:1 |
| Heat consumption (kj/kWh) | ≤ 9500 |
| Oil consumption (g/kWh) | ≤ 1.0 |
| Exhaust temp before turbine ( ºC ) | ≤ 650 |
| Water temperature ( ºC ) | ≤ 85 |
| Oil temperature ( ºC ) | ≤ 90 |
| Lubricating | Press and spray lubrication |
| Cooling method | Pressurized water cooling |
| Start mode | Air motor or electric motor |
|