High Quality Forged Round Bar En 39NiCrMo3 1.6510 40crnimo /4140/4130/5120/5140 Forged Round Bars/Rod

Model NO.
39NiCrMo3 1.6510 40CrNiMo /4140/4130/5120/5140
Special Use
Mold Steel, Free Cutting Steel, Cold Heading Steel, Tool Steel
Transport Package
Standard Packaging or Customized
Specification
100-12000mm
Trademark
meide
Origin
Shandong, China
HS Code
72141000
Production Capacity
1000 Ton/Month
Reference Price
$ 387.00 - 603.00
Contact Us

Product Description

High Quality Forged Round Bar En 39NiCrMo3 1.6510 40crnimo /4140/4130/5120/5140 Forged Round Bars/Rod
Introduction

It has high strength, high toughness, good hardenability, stability against overheating, high white spot sensitivity, and temper brittleness. The weldability of steel is poor, so it needs to be preheated at high temperature before welding and stress relief treatment after welding. It is generally used in the quenched and tempered state, and can also be used as ultra-high strength steel after low temperature tempering or isotherm
 

chemical composition
Grade C Si Mn Cr Ni Mo P S Cu
≤
20Mn2 0.17-0.24 0.17-0.37 1.40-1.80 ≤0.30 ≤0.30 ≤0.10 0.030 0.030 0.30
SMn420 0.17-0.23 0.15-0.35 1.20-1.50 ≤0.35 ≤0.25   0.030 0.030 0.30
1524 0.19-0.25 0.15-0.30 1.35-1.65 - -   0.040 0.050 0.20
22Mn6 0.18-0.25 0.10-0.40 1.30-1.65 ≤0.40 ≤0.40 ≤0.10 0.025 0.035 0.30
18Mn5
1.0436 		0.15-0.20 ≤0.40 0.90-1.60 ≤0.30 ≤0.30 ≤0.08 0.025 0.015 0.30
35Mn2 0.23-0.39 0.17-0.37 1.40-1.80 ≤0.30 ≤0.30 ≤0.10 0.030 0.030 0.30
SMn438 0.35-0.41 0.15-0.35 1.35-0.65 ≤0.35 ≤0.25 - 0.030 0.030 0.30
1335 0.33-0.38 0.15-0.35 1.60-1.90 ≤0.20 ≤0.25 ≤0.06 0.035 0.040 0.35
36Mn6 0.33-0.40 0.10-0.40 1.30-1.65 ≤0.40 ≤0.40 ≤0.10 0.025 0.035 0.30
40Mn2 0.37-0.44 0.17-0.37 1.40-1.80 ≤0.30 ≤0.30 ≤0.10 0.030 0.030 0.30
SMn443 0.40-0.46 0.15-0.35 1.35-1.65 ≤0.35 ≤0.25 - 0.030 0.030 0.30
1340 0.38-0.43 0.15-0.35 1.60-1.90 ≤0.20 ≤0.25 ≤0.06 0.035 0.040 0.35
55SiMnMo/60Si2Mn/SUP6/ 1.0909/60Si7 0.52-0.6 0.9-0.9 1-1.3 ≤0.35 - - 0.04 0.04 0.2
 SUP10 1.8159 50CrV4 50CrVA  0.47-0.55 0.15-0.35 0.65-0.95 0.8-1.1 - - 0.03 0.03 0.3
39NiCrMo3/ 1.6510 /40CrNiMo 0.35-0.43 ≤0.4 0.5-0.8 0.6-1 0.7-1 0.15-0.25 0.025 0.035 -
 
Product Description

 

 
Steel
        STB42    
20CrMo 20XM 4119,4118 CDS12 SCT42 18CD4 20CrMo44
      CDS110 STT42    
        STB42    
25CrMo   4125 En20A   25CD4 25CrMo4
30CrMo 30XM 4130 1717COS110 SCM420 30CD4  
             
42CrMo   4140 708A42   42CD4 42CrMo4
      708M40      
35CrMo 35XM 4135 708A37 SCM3 35CD4 34CrMo4
12CrMoV 12XMΦ          
12Cr1MoV 12X1MΦ         13CrMoV42
25Cr2Mo1VA 25X2M1ΦA          
20CrV 20XΦ 6120       22CrV4
40CrV 40XΦA 6140       42CrV6
50CrVA 50XΦA 6150 735A30 SUP10 50CV4 50CrV4
15CrMn 15XГ,18XГ          
20CrMn 20XГCA 5152 527A60 SUP9    
30CrMnSiA 30XГCA          
40CrNi 40XH 3140H 640M40 SNC236   40NiCr6
20CrNi3A 20XH3A 3316     20NC11 20NiCr14
30CrNi3A 30XH3A 3325 653M31 SNC631H   28NiCr10
    3330   SNC631    
20MnMoB   80B20        
38CrMoAlA 38XMIOA   905M39 SACM645 40CAD6.12 41CrAlMo07
40CrNiMoA 40XHMA 4340 871M40 SNCM439   40NiCrMo22
High Quality Forged Round Bar En 39NiCrMo3 1.6510 40crnimo /4140/4130/5120/5140 Forged Round Bars/Rod
mechanical behavior
Modulus of elasticity E
/GPa
Thermal conductivity λ/ W·(m·K)-1
20ºC
20ºC
100ºC
300ºC
400ºC
204
-
46.06
41.87
37.68
 
Linear expansion coefficient α/ 10-6 ·K-1
Specific heat capacity c/J·(g·K)-1
20~100ºC
20~200ºC
20~400ºC
20~600ºC
≈700ºC
20ºC
-
11.4
14
14.7
15
0.149

High Quality Forged Round Bar En 39NiCrMo3 1.6510 40crnimo /4140/4130/5120/5140 Forged Round Bars/Rod

Features and applications

 

  Main features Application
20CrNiMo
  		20CrNiMo steel is originally the steel grade 8720 in American AISI and SAE standards. The hardenability is similar to that of 20CrNi steel. Although the content of Ni in steel is half of that of 20CrNi steel, the upper part of the isothermal transformation curve of austenite moves to the right due to the addition of a small amount of Mo; also
Due to the proper increase of Mn content, the hardenability of this steel is still very good, and its strength is also higher than that of 20CrNi steel 		It is often used to manufacture gears in engines and transmission systems of small and medium-sized cars and tractors; It can also replace the manufacturing requirements of 12CrNi3 steel
Carburized parts and cyanided parts with high core performance, such as the jaw and cone body of the cone bit used in petroleum drilling and metallurgical open-pit mines
40CrNiMoA It has high strength, high toughness and good hardenability. When it is hardened to semi-martensitic hardness (HRC45), the critical hardenability diameter of water quenching is ¢ ≥ 100mm, and the critical hardenability diameter of oil quenching is ¢ ≥ 75mm; When hardening to 90% martensite, the critical diameter of water quenching is ≯ 80-90mm, and the critical diameter of oil quenching is ¢ 55-66mm. This steel has stability against overheating, but it has high self-point sensitivity, temper brittleness, and poor weldability. It needs to be preheated at high temperature before welding, and stress relief treatment after welding It is used after quenching and tempering to make important parts requiring good plasticity, high strength and large size, such as shafts with high load in heavy machinery
Class II, turbine shaft, blade, high-load transmission parts, fasteners, crankshaft, gear, etc. with diameter greater than 250mm; It can also be used for rotor shafts and blades with operating temperature over 400 ° C. In addition, this steel can also be used to make special properties after nitriding
Important parts required
High Quality Forged Round Bar En 39NiCrMo3 1.6510 40crnimo /4140/4130/5120/5140 Forged Round Bars/Rod

 

High Quality Forged Round Bar En 39NiCrMo3 1.6510 40crnimo /4140/4130/5120/5140 Forged Round Bars/Rod High Quality Forged Round Bar En 39NiCrMo3 1.6510 40crnimo /4140/4130/5120/5140 Forged Round Bars/Rod High Quality Forged Round Bar En 39NiCrMo3 1.6510 40crnimo /4140/4130/5120/5140 Forged Round Bars/Rod High Quality Forged Round Bar En 39NiCrMo3 1.6510 40crnimo /4140/4130/5120/5140 Forged Round Bars/Rod
High Quality Forged Round Bar En 39NiCrMo3 1.6510 40crnimo /4140/4130/5120/5140 Forged Round Bars/Rod

Packaging 		1. by bundles, each bundle weight under 3 tons, for small outer diameter steel bars, each bundle with 4 - 8 steel strips. 
2. after making by bundle, covered with Polyethylene waterproof cloth.
3. make black paints painting on each bar, then make bundles
20 feet container contains dimension Length under 6000mm
40 feet container contains dimension Length under 12000mm
By bulk vessel Freight charge is low by bulk cargo, and large heavy sizes can not be loaded into containers can shipping by bulk cargo
High Quality Forged Round Bar En 39NiCrMo3 1.6510 40crnimo /4140/4130/5120/5140 Forged Round Bars/Rod High Quality Forged Round Bar En 39NiCrMo3 1.6510 40crnimo /4140/4130/5120/5140 Forged Round Bars/Rod
FAQ

1. Who are we?
Our headquarter is located in Shandong, China. Since 2023, we have sold to North America (60.00%), Western Europe (14.00%) and South America (6.00%). There are about 11-50 people in our office.

2. How do we guarantee quality?
Always provide pre-production samples before mass production;
Always carry out final inspection before shipment;

3. What can you buy from us?
Copper, aluminum, die steel, titanium, customized machine parts
4. Why should you buy from us instead of other suppliers?
The company has 25 years of production experience. It has advanced precision production equipment, modern large warehouse, 200000 tons of inventory goods and a number of long-term stable cooperative customers.

5. What services can we provide?
Accepted delivery conditions: FOB, CFR, CIF, EXW
Accepted payment currency: US dollar, Euro, Japanese yen, Canadian dollar, Australian dollar, Hong Kong dollar, British pound, RMB, Swiss franc;
Accepted payment type: T/T, L/C, D/P D/A, PayPal;
Optional ports: Tianjin, Shanghai, Guangzhou;
Spoken: English, Chinese

6. How can we get your price?
A. We need the following information to quote for you:
1).  Product Name
2).  standard
3).  Material grade (chemical composition)
4).  dimension
5).  amount
6).  Special part drawing

 

Steel Round Bar

PNEUTEC.IT, 2023