Sighting System
STRONG-SR Series Two Color Pyrometers Technical Parameter
Model | STRONG-SR-6016 | STRONG-SR-6018 | STRONG-SR-7025 | STRONG-SR-7030 |
Measuring Range | 600ºC~1600ºC | 600ºC~1800ºC | 700ºC~2500ºC | 700ºC~3000ºC |
Detector | Si/Si (Laminated Silicon) | |||
1-color Wavelength | 1.08μm | |||
2-color Wavelength | Wavelength1 :(0.7~1.08)μm;Wavelength2:1.08μm | |||
Main Applications |
Hot
rolled
steel,
wire
rod,
metal
forging,casting,
induction heating,melting glass,cement kiln, semiconductor, vacuum furnace, polysilicon, monocrystal silicon |
High-temperature furnace, graphite furnace, polysilicon, monocrystal silicon furnace | ||
Distance Coefficient | 60:1 |
Standard
100:1;
60:1 customized |
200:1 | |
Measuring Distance | Standard focal length:adjustable from 0.35m to infinite;near focal length:0.2m~0.5m | |||
Measuring Accuracy | ±0.5%T (T is measured value) | |||
Resolution | 0.1ºC | |||
Repeat Accuracy | ±2ºC | |||
1-color Coefficient | 0.100 ~1.100,adjustable in 0.001 increment | |||
2-color Coefficient | 0.850 ~1.150,adjustable in 0.001 increment | |||
Response Time | Fastest 5ms,5ms-99.99s adjustable | |||
Signal processing | Peak value, valley value, average temperature value; Ambient temperature too high/low alarm; switch between one-color and two-color mode; power down protection. | |||
Output | Group1: Multiple analog outputs 16bit(4mA~20mA, 0mA~20mA, 0V~5V, 0V~10V optional), output resolution 16bit, accurate to 0.1ºC, maximum current loop output load 600Ω,maximum current output load 10mA | |||
Group2:
Analog
outputs
4mA
~
20mA,
resolution
16bit,
accurate
to
0.1ºC,
maximum
current loop output load 600Ω |
||||
Alarms output: upper or lower temperature limit alarm;PhotoMOS relay (infinite service life) on resistance≤2Ω, maximum allowed voltage: AC42V or DC60V; maximum allowed current: 120mA; response time: 2ms | ||||
PNP level output(current output 100mA,with overload protection.) | ||||
RS485 output,with functions of parameters modification, data logging and inquiry | ||||
Display Mode | Industrial-grade self-luminous OLED display screen | |||
Power Input | DC (20~30)V,with over voltage, over current and short circuit protection; Power consumption:5W(24V@200mA)with built-in EMI wave filter, resistance to pulse group's Interference:2500VDC | |||
Warm up time |
With
built-in
40ºC
constant
temperature
heater,
start
temperature
measurement
within
10mins after power on. Assembled whole-process temperature compensation, temperature measurement accuracy is nearly unaffected by ambient temperature. |
|||
Aiming Method | Green visible aiming laser or eyepiece, choose 1 | |||
Port | Imported sealed plug and 12-core high-temperature shielded cable | |||
Operating Environment |
No
water
cooling:-30ºC~+65ºC,air
purge
pressure:
0.1MPa,flow
rate:
6L/
min
With water cooling:-30ºC~+120ºC,water cooling pressure: 0.2MPa,flow rate: 2L/min |
|||
Protection Level | IP65 |
•
Temperature measuring range covers 250ºC~3000ºC
•
Temperature measuring accuracy is 0.5%, repeat accuracy is 2ºC,resolution is 0.1ºC
•
Response time is adjustable from 5ms~99.99s
•
Use manually adjustable focus lens, a standard focal length is from 0.35m to infinity, a near focal length is adjustable from 0.2m to 0.5m
•
PID constant temperature control is adopted for the detector, with full range temperature compensation to avoid influence of ambient temperature on the measuring accuracy
•
This series has both two-color and one-color measurement function
•
Use high brightness green LED light source or eyepiece aiming, clearly display the location and size of test target
•
In two color mode, pyrometer has lens dirty detection function
•
Use industrial grade OLED screen as display interface, friendly man-machine interface
•
Rich peripheral interface: 2 independent analog output, 2 alarm output, 1channel level output and 1 channel RS485 communication interface
•
Anti- jamming design of software and hardware improves system stability, and can resist 2500VDC burst interference
•
Anti-oxidation measurement function, with this function, measurement will not be affected by oxide
•
Support bus cascade connection of up to 26 pyrometers, and realize network control through PC
Changzhou Sijie Optoelectronics has more than 20 years experience in infrared products Research and Development, we master core technology and possess independent intellectual property rights in infrared pyrometer design and manufacturing. We are continuous providing products with stable and reliable quality. Which benefit from implement strict and comprehensive quality control based on product design, parts selection, supplier selection, product assembly, finished product inspection, after-sales service as well as strong technical force, mature production process, advanced experimental equipment, complete production facilities.
Our company's main products are STRONG series two
color pyrometer and one
color pyrometer, SMART series optical fiber two
color pyrometer and one
color pyrometer, MARS series one
color pyrometer and so on. Our Products is in a leading position in China and abroad. Our products are widely used in metallurgy, heat treatment, chemical, electric power, photovoltaic, cement, glass, refractory, crystal material production and other industries.
Our products have received high praise from our end-users. Adhering to the business philosophy of "improving quality by innovation and creating value for customers", Sijie optoelectronics have beening focusing on the field of infrared photoelectricity measurement and will wholeheartedly provide customers with high-quality products and professional services.
Package size per unit product | 36*26*18cm |
Gross weight per unit product | 5kg(with cooling jacket and air purge) |