Modern Techniques Smart Series Two-Color Infrared Pyrometer for Polycrystalline Furnace

Model NO.
SMART-FSR-7025
Usage
Industrial
Resolution
0.1ºC
Output
Multiple Analog/Alarms/PNP/RS485 Output
After-Sales Service
24 Hours Customer Service
Application
Steelmetallurgy/Heattreatment/Furnace/Photovoltaic
Accuracy
±0.5%
Response Time
Fastest 5ms, 5ms-99.99s Adjustable
Repeat Accuracy
±2ºC
Temperature Range
700ºC-2500ºC
Wavelength
Wavelength1:(0.7~1.08)μm;Wavelength2:1.08μm
Warranty
2 Years
Transport Package
Carton/ Wooden Case
Trademark
SIJIE INFRARED
Origin
China
HS Code
90251910
Production Capacity
500 Sets/Month
Reference Price
$ 2,646.00 - 3,051.00
Contact Us

Product Description

Sighting System
Modern Techniques Smart Series Two-Color Infrared Pyrometer for Polycrystalline Furnace

Product Description


SMART-F series two color infrared pyrometer is a series of high performance and intelligent two-color infrared pyrometer. It consists of lens, fiber optics and processing components. Fiber optic can bear high temperature up to 250°C and do not need additional cooling. It has strong casing, use stainless steel lens(with air purge functions), die cast aluminum housing, protection grade is IP54.

It use the manual adjustable focal lens, achromatic lens combination, high reliability circuit design (low temperature drift, fully digital measurement design, high integration SOC chip application, visualization OLED operation interface) and software design(ambient temperature compensation, real-time signal processing, abnormal signal processing, software code optimization in all kinds of application environment).These special designs enable SMART-F series one-color pyrometer to meet the use in a variety of harsh industrial sites and precise temperature control requirements. SMART-F series two-color pyrometer determines the temperature of an object by measuring the ratio of energy at two different wavelengths. The advanced software and hardware design help pyrometers meet the application in harsh environment as moisture, dust, target size change, partial blockage and emissivity change, even if the detection signal attenuates 95%, the temperature measurement results will not be effected.

SMART-F series two-color infrared pyrometer can meet the requirements of two color measuring in various industrial occasions. For example, medium-high temperature below 2000°C, such as: hot rolled plate, casting, cement kiln, heat treatment, induction heating, monocrystalline silicon and polycrystalline silicon, etc. It can also be used in ultra-high temperature below 3000°C measuring with high stability, such as vacuum furnace, graphite furnace, high-temperature furnace etc. SMART-F series is not only suitable for general industrial occasions of temperature measurement, but also suitable for installation in occasions with strong electromagnetic interference and high environmental temperature.

Product Parameters

SMART Series Two-Color Technical Parameter

Model SMART-FGR-4014 SMART-FGR-4522 SMART-FSR-6016 SMART-FSR-7025 SMART-FSR-8030
Measuring  Range(ºC) 400~1400 450~2200 600~1600 700~2500 800~3000
Detector
InGaAs/InGaAs
Si/Si(Laminated Silicon)
Wavelength
Wavelength 1:(0.9~1.7)μm,
Wavelength 2:1.7μm
Wavelength 1:(0.7~1.08)μm,
Wavelength 2:1.08μm
Main Application
Continue casting, hot rolling, induction heating, polysilicon, monocrystal silicon,
measurement in high temperature environment.
Distance Coefficient 50:1 100:1 50:1 100:1 200:1
Measuring Distance
adjustable from 0.15m to infinite
Measuring Accuracy
±0.5%tmºC(tm is upper limit of measuring range)
Resolution 0.1ºC
Repeat  Accuracy ±2ºC
1-color Coefficient 0.100 ~1.100,adjustable   in   0.001   increment
2-color Coefficient 0.850 ~1.150,adjustable   in   0.001   increment
Response  Time Fastest  5ms,5ms~99.99ms  adjustable
Signal  processing Peak value, valley value, average temperature value; Ambient temperature too high/low alarm;Power down protection etc.
Output
Group1: Multiple analog outputs 16bit(4mA~20mA,0mA~20mA,0V~5V,0V~ 10V switchable ), output resolution 16bit,accurate to 0.1 °C ,maximum current loop output load 600Ω,maximum current output load 10mA
Group2: Analog outputs 4mA~20mA, resolution 16bit, accurate to 0.1ºC, maximum current loop output load 600Ω
Alarms output: upper or lower temperature limit alarm;PhotoMOS relay (infinite service life) on resistance≤2Ω, maximum allowed voltage: AC42V or DC60V; maximum allowed current: 120mA; response time: 2ms
PNP level output(current output 100mA,with overload protection.)
RS485 output,with functions of parameters modification, data logging and inquiry
Display  Mode Industrial-grade  self-luminous   OLED   display   screen
Power  Input DC (20~30)V,power consumption: 5W(24V@200mA), with over voltage, over current and short circuit protection; with built-in EMI wave filter, resistance to pulse group's Interference of 2500VDC
Warm up time
With built-in constant temperature heater,start temperature measurement within 10mins after power on
Aiming Method
Built-in red laser aiming
Operating environment
No water cooling:-20ºC~+60ºC,
With water cooling:-20ºC~+200ºC,water cooling pressure: 0.2MPa,flow rate: 2L/min
Lens and fiber:-20ºC~+250ºC(air purge pressure: 0.1MPa,flow rate: 6L/ min)
IP rate IP54
Product Features

•  Temperature measuring range covers 400ºC ~3000ºC
•  Temperature measurement accuracy up to 0.5%,repeat accuracy 2ºC ,Resolution 0. 1 ºC
•  Response time 5ms~99.99s adjustable
•  Use manually adjustable focus lens,focal length is from 0.15m to infinity
•  Using laser aiming, clearly show position and size of target
•  PID constant temperature control is adopted for the detector,with full range temperature compensation to avoid influence of ambient temperature on the measuring accuracy
•  This series has both two-color and one-color measurement function
•  Use industrial grade OLED screen as display interface, friendly man-machine interface
•  Rich peripheral interface: 2 independent analog output, 2 alarm output, 1channel level output and 1 channel RS485 communication interface
•  Anti- jamming design of software and hardware improves system stability, and canresist 2500VDC burst interference
•  Support bus cascade connection of up to 26 pyrometers, and realize network control through PC

Application Area

Modern Techniques Smart Series Two-Color Infrared Pyrometer for Polycrystalline Furnace Modern Techniques Smart Series Two-Color Infrared Pyrometer for Polycrystalline Furnace

Company Profile



Changzhou Sijie Optoelectronics has more than 20 years experience in infrared products Research and Development, we master core technology and possess independent intellectual property rights in infrared pyrometer design and manufacturing. We are continuous providing products with stable and reliable quality. Which benefit from implement strict and comprehensive quality control based on product design, parts selection, supplier selection, product assembly, finished product inspection, after-sales service as well as strong technical force, mature production process, advanced experimental equipment, complete production facilities. 
Our company's main products are STRONG series two   color pyrometer and one   color pyrometer, SMART series optical fiber two   color pyrometer and one   color pyrometer, MARS series one   color pyrometer and so on. Our Products is in a leading position in China and abroad. Our products are widely used in metallurgy, heat treatment, chemical, electric power, photovoltaic, cement, glass, refractory, crystal material production and other industries.   Our products have received high praise from our end-users. Adhering to the business philosophy of "improving quality by innovation and creating value for customers", Sijie optoelectronics have beening focusing on the field of infrared photoelectricity measurement and will wholeheartedly provide customers with high-quality products and professional services.

Packaging & Shipping
Package size per unit product 36*26*18cm
Gross weight per unit product 5kg(with cooling jacket and air purge)

 

Exhibiting

Certifications

 

Infrared Sensor

PNEUTEC.IT, 2023