Sighting System
SMART Series One-Color Technical Parameter
Model | SMART-FS-6016 | SMART-FS-7022 | SMART-FS-7030 | SMART-FS-3014 | SMART-FS-3522 | SMART-FS-4030 |
Measuring Range(ºC) | 600~1600 | 700~2200 | 700~3000 | 300~1400 | 350~2200 | 400~3000 |
Detector |
Si(silicon photoelectric cell)
|
InGaAs
|
||||
Wavelength | ( 0.85~1.1)μm | ( 1.45~1.7)μm | ||||
Main Application |
Continuous casting, hot rolling, induction heating, polysilicon, monocrystal silicon, measurement in high temperature environment.
|
Induction heating, heat treatment, polysilicon
and monocrystal silicon, measurement in high temperature environment. |
||||
Distance Coefficient | 150:1 | 200:1 | 150:1 | 200:1 | ||
Measuring Distance |
adjustable from 0.15m to infinite
|
|||||
Measuring Accuracy |
±0.5%tmºC(tm is upper limit of measuring range)
|
|||||
Resolution | 0.1ºC | |||||
Repeat Accuracy | ±2ºC | |||||
1-color Coefficient | 0.100 ~1.100,adjustable in 0.001 increment | |||||
Response Time | Fastest 5ms, adjustable | |||||
Signal processing | Peak value, valley value, average temperature value; Ambient temperature too high/low alarm;Power down protection etc. | |||||
Output |
Group1: Multiple analog outputs 16bit(4mA~20mA,0mA~20mA,0V~5V, 0V~10V switchable ), output resolution 16bit,accurate to 0.1ºC,maximum current loop output load 600Ω, maximum current output load 10mA
|
|||||
Group2: Analog outputs 4mA~20mA, resolution 16bit, accurate to 0.1ºC, maximum current loop output load 600Ω
|
||||||
Alarms output: upper or lower temperature limit alarm;PhotoMOS relay (infinite service life) on resistance≤2Ω, maximum allowed voltage: AC42V or DC60V; maximum allowed current: 120mA; response time: 2ms
|
||||||
PNP level output(current output 100mA,with overload protection.)
|
||||||
RS485 output,with functions of parameters modification, data logging and inquiry
|
||||||
Display Mode | Industrial-grade self-luminous OLED display screen | |||||
Power Supply | DC (20~30)V,power consumption: 5W(24V@200mA), with over voltage, over current and short circuit protection; with built-in EMI wave filter, resistance to pulse group's Interference of 2500VDC | |||||
Warm up time
|
With built-in 40ºC constant temperature heater, assembled whole-process temperature compensation, temperature measurement accuracy is nearly unaffected by ambient temperature.
|
|||||
Aiming Method
|
Built-in red laser aiming
|
|||||
Operating environment |
No water cooling:-20ºC~+60ºC,
With water cooling:-20ºC~+200ºC,water cooling pressure: 0.2MPa,flow rate: 2L/min
Lens and fiber:-20ºC~+250ºC(air purge pressure: 0.1MPa,flow rate: 6L/ min)
|
|||||
IP rate | IP54 |
•
Temperature measuring range covers 300ºC ~3000ºC
•
Temperature measurement accuracy up to 0.5%
•
Repeat accuracy 2ºC ,Resolution 0. 1 ºC
•
Response time 5ms~99.99s adjustable
•
Use manually adjustable focus lens
•
Using laser aiming, clearly show position and size of target
•
PID constant temperature control is adopted for the detector,with full range temperature compensation to avoid influence of ambient temperature on the measuring accuracy
•
Narrow-band infrared color filter specially designed to minimizes the influence of emissivity on detector
•
Use industrial grade OLED screen as display interface, friendly man-machine interface
•
Rich peripheral interface: 2 independent analog output, 2 alarm output, 1channel level output and 1 channel RS485 communication interface
•
Use watchdog such as hardware EMI filter to improve the stability of the system, which can resist 2500VDC pulse group interference
•
Support bus cascade connection of up to 26 pyrometers, and realize network control through PC
Changzhou Sijie Optoelectronics has more than 20 years experience in infrared products Research and Development, we master core technology and possess independent intellectual property rights in infrared pyrometer design and manufacturing. We are continuous providing products with stable and reliable quality. Which benefit from implement strict and comprehensive quality control based on product design, parts selection, supplier selection, product assembly, finished product inspection, after-sales service as well as strong technical force, mature production process, advanced experimental equipment, complete production facilities.
Our company's main products are STRONG series two
color pyrometer and one
color pyrometer, SMART series optical fiber two
color pyrometer and one
color pyrometer, MARS series one
color pyrometer and so on. Our Products is in a leading position in China and abroad. Our products are widely used in metallurgy, heat treatment, chemical, electric power, photovoltaic, cement, glass, refractory, crystal material production and other industries.
Our products have received high praise from our end-users. Adhering to the business philosophy of "improving quality by innovation and creating value for customers", Sijie optoelectronics have beening focusing on the field of infrared photoelectricity measurement and will wholeheartedly provide customers with high-quality products and professional services.
Package size per unit product | 36*26*18cm |
Gross weight per unit product | 5kg(with cooling jacket and air purge) |