Build-in Type Ultrasonic Gas Flowmeter

Model NO.
LYNSB
Measuring Media
Gas
Measuring Principle
Acoustics
Measurement Object
Closed Pipeline
Certification
JIS, DIN, ANS, GB, CE, ISO
Pressure
16bar to 63bar
Transport Package
Wooden Case
Specification
transmit time principle
Trademark
YINUO
Origin
Shanghai, China.
HS Code
9026100000
Production Capacity
2000
Reference Price
Please contact us for quote
Contact Us

Product Description

 
LYNSB Series Build-in Type Ultrasonic Gas Flow Meter
Build-in Type Ultrasonic Gas Flowmeter
Build-in Type Ultrasonic Gas Flowmeter

 
1.1Introduction
LYNSB- Ultrasonic Gas Flow Meter (hereafter call Ultrasonic Meter) is the key and newly designed product with cutting-edge technology. It can be used in process measuring and custody transfer metering in fields such as gas production of oilfields,energy, and environmental protection. Compared with traditional flowmeters,
Ultrasonic Meter with remarkable performance like low pressure, low velocity, no pressure loss, high accuracy, is becoming the most advanced and quickly developed new flowmeter.

1.2 WorkingTheory
Ultrasonic wave is sonic wave with frequency larger than 20000Hz featured with better directionality, penetration and energy concentration, which makes Ultrasonic Meter the new advance flowmeter.
Ultrasonic Meter uses theory of acoustic transit time, as in Fig 1-1:
                                                           Build-in Type Ultrasonic Gas Flowmeter

Transducer A (Upstream) sends ultrasonic wave that transits in the pipe and will make total reflection when it touch the smooth and high hardness pipe bottom, and then it goes to B(Downstream) transducer that will receive this wave, which make one sonic path. After B receives the wave, it will send another ultrasonic wave that to be received by A. As the medium is actually carrier of sonic wave, when it flows, the transit time will be different with different flow velocity, which will result in flow velocity and flowrate after calculation of mathematical model.
Flow velocity: Build-in Type Ultrasonic Gas Flowmeter

Sound velocity: Build-in Type Ultrasonic Gas Flowmeter

Flowrate: Build-in Type Ultrasonic Gas Flowmeter

Where:
  V: Gas flow velocity (m/s)
  C: Sound velocity (m/s)
  F: Volume of flowing medium (m3/h)
  D: Diameter of pipe (m)
   : Angle of path to the flow (o)
   : Transit time from transducer A to B (s)
   : Transit time from transducer B to A (s)
   : Sound delay time by circuit, cable and transducer from A to B/ Sound delay time by circuit, cable and transducer from B to A (s)
 
  • Features 
C ompared with traditional flowmeter, Ultrasonic Meter has outstanding features:
1)  Good performance for measuring low frequency pulsating flow and stable flow;
2)  Can be used for tough medium like gas with little vapor or coal tar;
3)  High accuracy up to 1.0%, and repeatability less than 0.2%;
  1. Wide turndown ratio, up to 1:30;
  2. Bi-direction measurement, suitable for small working pressure and low flow velocity;
  3. Multi-path measurement can reduce the influence of turbulent flow, and the meter can also work normally when one path broken down;
  4. No movable parts inside, near no pressure drop, little maintenance;
  5. Self-diagnose function will help to judge, correct and alarm for failures, thus reduce measurement loss;
  6. It can output flowrate in standard condition after temperature and pressure compensation.  
    < > Ultrasonic MeterIn long transportation line of natural gas;
  7. In city gas;
  8. For well head gas in oilfield;
  9. Boiler gas;
  10. In large gasification process;
  11. Industrial waste gas and torch gas.

2.  Product Performance

2.1 Performance 

As in Table 2-1.
T able2-1 Product Performance
Accuracy ±1.0%, ±1.5%
Diameter DN25mm~DN100mm
Turndown Ratio >1:30
Medium Gas
Output Signal Pulse, 4~20mA
Communication Protocol  MODBUS Protocol
Ex-proof Common type, Ex-proof type
Protection IP65
Ex-proof Grade  Exdib II BT4(GYB101058)
Working Temp. -40ºC ~+85ºC
Max. Overload Flowrate 120%
Power Supply DC 24V (600mA), DC12V(1A)
Nominal Pressure 1.6MPa ,2.5MPa,4.0MPa,6.3MPa 
 
 

2.2 Flow Range

T able2-2 Flow Range in Working Condition
Accuracy 1.0 1.5 Working pressure
(MPa) 		Repeatability
Repeatability 0.2 0.3
Velocity ( m/s) ( 1.0~25m/s ) ( 0.8~25 m/s )
1.6
2.5
4.0
6.3
Less than 1/5 of the absolute value of the basic error limit
Size (mm) Flowrange (m3/h)
25 1.8~45 1.4~45
50 7~180 5.5~180
80 18~450 14~450
100 28~700 23~700


2.3 Current Output 4~20mA

The current output is passive and the flowrate in standard condition relative to 20mA can be revised.
Table 2-3 Parameters for 4~20mA passive output
Range (4~20)mA
Basic Error 0.1% FS
Temperature influence ±0.01% / ºC
The sample resistance shall be 250~600 Ω

2.4 Positive Frequency Output

Positive frequency output shows gas flowrate in standard condition and its pulse equivalent can be revised.
Table 2-4 Parameters for frequency output
Frequency Range (0~2)kHz
Basic Error ±0.0005%
Temperature influence ±0.0001% / ºC

2.5 RS485 Output

RS485 of Ultrasonic Meter use Modbus protocol and RTU mode. Please refer to item 5.5 of user manual, or contact local agency.

2.6 Working Condition 

Table 2-6 Ambient condition
Ambient temperature -25ºC~+55ºC
Relative Humidity 5%~95%
magnetic field intensity <400A/m
Mechanical vibration f<30Hz, amplitude<0.1m
Magnetic interference Avoid such interference
Sonic noise Avoid such noise

2.7 Power Consumption

Normal power consumption is 5W, max. 7W.

2.8 Weight 

Table 2-8 Weight for Ultrasonic Meter
Size ( mm ) 25 50 80 100
Weight (kg ) 15 18 25 35

Note: the above weight is for Ultrasonic Meter with PN=1.6mpa


Build-in Type Ultrasonic Gas Flowmeter
Build-in Type Ultrasonic Gas Flowmeter


Why Yinuo
(1) For electronic products, we have automatic chip mounter (SMT) production line and high/low temp. testing equipment.
(2) For mechanical products, we have advantage on casting, machining, and welding.
(3) For calibration, we have calibration facilities approved by China government for oil, water and gas.
(4) For flowmeter, we are Top leaders in China for both of Coriolis Mass Flowmeter & PD flowmeter, which be approved the UL, CE, CCS (China) and BV certificate (France) for marine market.
(5) For pump, we combined Russian military technology with China low cost to manufacture for large capacity transportation of oil, chemical, water, and wastewater even if contain some participles and we also design and produce twin-screw pump for high pressure, high viscosity liquid with multiphase.
(6) For SCADA loading & metering/ Skid Mount System, we also have much experience in China and in Afghanistan, Angola, Equatorial Guinea, Myanmar and are trying to promote in all over the world.



 

 

Flow Meter

PNEUTEC.IT, 2023