KEY FEATURES:
1.Next generation Trimble® ProPoint™ GNSS
positioning engine. Engineered for improved
accuracy and productivity in challenging
GNSS conditions.
2.672-channel solution with Trimble 360 satellite
tracking technology
3.Trimble SurePoint™ tilt compensation and precise
position capture
4.Trimble xFill® correction outage technology
Support for RTK level precision
5.Trimble CenterPoint® RTX corrections technology
6.Optimized for Trimble Access™ field software
7.Android™ and iOS platform support
8.Cellular, Bluetooth®, Wi-Fi data connectivity
9.Military-spec rugged design and IP-67 rating
10.Ergonomic form factor
11.All day battery with built-in status indicator
12.6 GB internal memory
PERFORMANCE SPECIFICATIONS | |
GNSS MEASUREMENTS | |
Constellation agnostic, flexible signal tracking and improved positioning1 in challenging environments with Trimble ProPoint GNSS technology | |
Increased measurement productivity and traceability with Trimble SurePoint eBubble tilt compensation | |
Advanced Trimble Custom Survey GNSS chips with 672 channels | |
Reduced downtime due to loss of radio signal or cellular connectivity with Trimble xFill technology | |
Signals tracked simultaneously | GPS: L1C, L1C/A, L2C, L2E, L5 |
GLONASS: L1C/A, L1P, L2C/A, L2P, L3 | |
SBAS (WAAS, EGNOS, GAGAN, MSAS): L1C/A, L5 | |
Galileo: E1, E5A, E5B, E5 AltBOC, E62 | |
BeiDou: B1, B1C, B2, B2A, B3 | |
QZSS: L1C/A, L1S, L1C, L2C, L5, L6 | |
NavIC (IRNSS): L5 | |
L-band: CenterPoint RTX | |
Iridium filtering above 1616 MHz allows antenna to be used up to 20 m away from iridium transmitter | |
Japanese LTE filtering below 1510 MHz allows antenna to be used up to 100 m away from Japanese LTE cell tower | |
Digital Signal Processor (DSP) techniques to detect and recover from spoofed GNSS signals | |
Advanced Receiver Autonomous Integrity Monitoring (RAIM) algorithm to detect and reject problem satellite measurements to improve position quality | |
Improved protection from erroneous ephemeris data | |
Positioning Rates 1 Hz, 2 Hz, 5 Hz, 10 Hz, and 20 Hz | |
POSITIONING PERFORMANCE | |
CODE DIFFERENTIAL GNSS POSITIONING | |
Horizontal | 0.25 m + 1 ppm RMS |
Vertical | 0.50 m + 1 ppm RMS |
SBAS4 | typically <5 m 3DRMS |
STATIC GNSS SURVEYING | |
High-Precision Static | |
Horizontal | 3 mm + 0.1 ppm RMS |
Vertical | 3.5 mm + 0.4 ppm RMS |
Static and Fast Static | |
Horizontal | 3 mm + 0.5 ppm RMS |
Vertical | 5 mm + 0.5 ppm RMS |
REAL TIME KINEMATIC SURVEYING | |
Single Baseline <30 km | |
Horizontal | 8 mm + 1 ppm RMS |
Vertical | 15 mm + 1 ppm RMS |
Network RTK | |
Horizontal | 8 mm + 0.5 ppm RMS |
Vertical | 15 mm + 0.5 ppm RMS |
RTK start-up time for specified precisions6 | 2 to 8 seconds |
TRIMBLE RTX™ TECHNOLOGY (SATELLITE AND CELLULAR/INTERNET (IP)) | |
CenterPoint RTX | |
Horizontal | 2 cm RMS |
Vertical | 5 cm RMS |
RTX convergence time for specified precisions -Worldwide | < 3 min |
RTX QuickStart convergence time for specified precisions | < 5 min |
RTX convergence time for specified precisions in select regions (Trimble RTX Fast Regions) | < 1 min |
TRIMBLE XFILL | |
Horizontal | RTK9 + 10 mm/minute RMS |
Vertical | RTK9 + 20 mm/minute RMS |
HARDWARE | |
PHYSICAL | |
Dimensions | (W×H) 11.9 cm x 13.6 cm (4.6 in x 5.4 in) |
Weight | 1.12 kg (2.49 lb) with internal battery, internal radio with UHF antenna,3.95 kg (8.71 lb) items above plus range pole, Trimble TSC7 controller & bracket |
Temperature | |
Operating | -40 °C to +65 °C (-40 °F to +149 °F) |
Storage | -40 °C to +75 °C (-40 °F to +167 °F) |
Humidity | 100%, condensing |
Ingress protection | IP67 dustproof, protected from temporary immersion to depth of 1 m (3.28 ft) |
Shock and vibration (Tested and meets the following environmental standards) | |
Shock | Non-operating: Designed to survive a 2 m (6.6 ft) pole drop onto concrete. |
Operating: to 40 G, 10 msec, sawtooth | |
Vibration | MIL-STD-810F, FIG.514.5C-1 |
ELECTRICAL | |
Power 11 to 24 V DC external power input with over-voltage protection on Port 1 and Port 2 (7-pin Lemo) | |
Rechargeable, removable 7.4 V, 3.7 Ah Lithium-ion smart battery with LED status indicators | |
Power consumption is 4.2 W in RTK rover mode with internal radio11 | |
Operating times on internal battery12 | |
450 MHz receive only option | 6.5 hours |
450 MHz receive/transmit option (0.5 W) | 6.0 hours |
450 MHz receive/transmit option (2.0 W) | 5.5 hours |
Cellular receive option | 6.5 hours |
COMMUNICATIONS AND DATA STORAGE | |
Serial | 3-wire serial (7-pin Lemo) |
USB v2.0 | Supports data download and high speed communications |
Radio modem | Fully Integrated, sealed 450 MHz wide band receiver/transmitter with frequency range of 403 MHz to 473 MHz, support of |
Trimble, Pacific Crest, and SATEL radio protocols: | |
Transmit power :2 W | |
Range :3-5 km typical / 10 km optimal13 | |
Cellular |
Integrated, 3.5 G modem, HSDPA 7.2 Mbps (download), GPRS multi-slot class 12, EDGE multi-slot class 12, Penta-band
UMTS/HSDPA (WCDMA/FDD) 800/850/900/1900/2100 MHz, Quad-band EGSM 850/900/1800/1900 MHz, GSM CSD,3GPP LTE |
Bluetooth | Version 4.115 |
Wi-Fi | 802.11 b,g, access point and client mode, WPA/WPA2/WEP64/WEP128 encryption |
I/O ports | Serial, USB, TCP/IP, IBSS/NTRIP, Bluetooth |
Data storage | 6 GB internal memory |
Data format |
CMR+, CMRx, RTCM 2.1, RTCM 2.3, RTCM 3.0, RTCM 3.1, RTCM 3.2 input and output
24 NMEA outputs, GSOF, RT17 and RT27 outputs |
WEBUI | |
Offers simple configuration, operation, status, and data transfer | |
Accessible via Wi-Fi, Serial, USB, and Bluetooth | |
SUPPORTED CONTROLLERS & FIELD SOFTWARE | |
FCC Part 15 (Class B device), 24, 32; CE Mark; RCM; PTCRB; BT SIG |
1.All products are inspected before shipment, if you are not satisfactory with the purchase, you can exchange the items in one week, and you must contact us within 24 hour of receipt of the products.
2.The shipping charges are not refundable and the customer should be responsible for all the charges of return and reshipping.
3.For our majority products (Auto level, Theodolite, Total Station) we are offing 1 year warranty;
4.For small issues like missing or damaged part, key board, please send us the photos, we will send the required part and related instructions to you for free;
5. For big issues in one year warranty like EDX board, main board issue. We could only ask you to send the instrument back to us. Normally we will have it fixed in 10 working days and send back to you. You and we shall take care of the corresponding shipping cost on each side. For big issues out of one year warranty, the customer should be responsible for all the cost.